ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/2] ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion
Quoted 7 lines · Florian Vaussard
The Gumstix Overo is a computer on module using an OMAP3 processor. This module must be plugged into an expansion board.
This patchset adds a first device tree support for the Overo, using the Tobi expansion board. The current support is able to boot and mount the rootfs from MMC, with a few extra features.
Quoted 6 lines
The first patch creates the device tree for both the Overo and the Tobi expansion board, and updates the dtb build target.
The second patch updates the omap/dts documentation.
This patchset applies on tony's tree [1], devel-dt branch.
Great, I'm assuming Benoit will pick this up as well.
Regards,
Tony
Quoted 23 lines
Regards,
Florian
[1] http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap.git;a=summary
Florian Vaussard (2):
ARM: omap/dts: Add support for Gumstix Overo with Tobi expansion
board
ARM: omap/dts: update the documentation.../devicetree/bindings/arm/omap/omap.txt | 3 + arch/arm/boot/dts/omap3-overo.dtsi | 42 ++++++++++++++++++++ arch/arm/boot/dts/omap3-tobi.dts | 35 ++++++++++++++++ arch/arm/mach-omap2/Makefile.boot | 2 +- 4 files changed, 81 insertions(+), 1 deletions(-) create mode 100644 arch/arm/boot/dts/omap3-overo.dtsi create mode 100644 arch/arm/boot/dts/omap3-tobi.dtsSignature · 1 line
1.7.5.4