Skip to content

Initial multi-platform support

Jamie Iles linux-arm-kernel 1 version New

Get series with b4
b4 am 20120910190711.GA11366@page

Versions newest first

  1. v3 Latest0 of 12 patches 0 repliesNew

Patches in v3 No applies recorded yet

None of the 12 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchJamie Iles
SeriesA-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 00/12] Initial multi-platform support

Hi Rob,

Quoted 20 lines · Rob Herring

From: Rob Herring <[email protected]>

This series enables initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on some DEBUG_LL and dtb build rules restructuring. This series is also dependent on my gpio clean-up series posted here:

http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/118138.html

New in this version:
- Moved ARCH_MULTIPLATFORM back into choice so converted platforms' defconfigs work before and after conversion.
- Added mvebu, socfpga and picoxcell DEBUG_LL support. DEBUG_LL should work for all converted platforms.
- Fixed make dtbs.
- Removed all unused headers (timex.h, uncompress.h) and Makefile.boot
- Add ARCH_MULTIPLATFORM depends for XIP found with randconfig builds
- Split out Vexpress to separate patch as now DT board support is always enabled.

Quoted 2 lines

This series plus gpio clean-up is available here:
git://sources.calxeda.com/kernel/linux.git multi-plat

This all looks great, thanks for your hard work! I needed a small fixup patch (below), feel free to fold it into your patches or whatever you think is best.

8<---

Subject: [PATCH] ARM: picoxcell: fixup multiplatform breakage.

The debug macros had a dependency on mach headers. Break that dependency and restore building.

---
 arch/arm/include/debug/picoxcell.S      |    4 ++--
 arch/arm/mach-picoxcell/common.c        |   11 ++++++-----
 arch/arm/mach-picoxcell/picoxcell_soc.h |   25 -------------------------
 3 files changed, 8 insertions(+), 32 deletions(-)
 delete mode 100644 arch/arm/mach-picoxcell/picoxcell_soc.h
arch/arm/include/debug/picoxcell.S +2 -2
index 58d4ee3..7419deb 100644
@@ -9,10 +9,10 @@
  * accesses to the 8250.
  */
 #include <linux/serial_reg.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
 
 #define UART_SHIFT 2
+#define PICOXCELL_UART1_BASE		0x80230000
+#define PHYS_TO_IO(x)			(((x) & 0x00ffffff) | 0xfe000000)
 
 		.macro	addruart, rp, rv, tmp
 		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
arch/arm/mach-picoxcell/common.c +6 -5
index a8b70b5..f6c0849 100644
@@ -20,14 +20,15 @@
 #include <asm/hardware/vic.h>
 #include <asm/mach/map.h>
 
-#include "picoxcell_soc.h"
 #include "common.h"
 
-#define PHYS_TO_IO(x)		(((x) & 0x00ffffff) | 0xfe000000)
+#define PHYS_TO_IO(x)			(((x) & 0x00ffffff) | 0xfe000000)
+#define PICOXCELL_PERIPH_BASE		0x80000000
+#define PICOXCELL_PERIPH_LENGTH		SZ_4M
 
-#define WDT_CTRL_REG_EN_MASK	(1 << 0)
-#define WDT_CTRL_REG_OFFS	(0x00)
-#define WDT_TIMEOUT_REG_OFFS	(0x04)
+#define WDT_CTRL_REG_EN_MASK		(1 << 0)
+#define WDT_CTRL_REG_OFFS		(0x00)
+#define WDT_TIMEOUT_REG_OFFS		(0x04)
 static void __iomem *wdt_regs;
 
 /*
arch/arm/mach-picoxcell/picoxcell_soc.h deleted +0 -25
deleted file mode 100644
index 5566fc8..0000000
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This file contains the hardware definitions of the picoXcell SoC devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __PICOXCELL_SOC_H__
-#define __PICOXCELL_SOC_H__
-
-#define PICOXCELL_UART1_BASE		0x80230000
-#define PICOXCELL_PERIPH_BASE		0x80000000
-#define PICOXCELL_PERIPH_LENGTH		SZ_4M
-#define PICOXCELL_VIC0_BASE		0x80060000
-#define PICOXCELL_VIC1_BASE		0x80064000
-
-#endif /* __PICOXCELL_SOC_H__ */
Signature · 1 line
1.7.9.5