Move Tegra EHCI drive to correct place
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest posting 2/20 of 7 patches 0 repliesNew
- v3 posting 1/20 of 7 patches 0 repliesSuperseded
- v2 posting 2/20 of 7 patches 0 repliesSuperseded
Earlier versions · 2
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v2 posting 1/2 | 0 of 7 patches | 0 replies | Superseded | |
| v1 | 1 patch | 0 replies | Superseded |
Patches in v3 posting 2/2 No applies recorded yet
None of the 7 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [U-Boot] [PATCH v3 0/7] Move Tegra EHCI drive to correct place
Dear Lucas Stach,
Quoted 29 lines
This moves out the Tegra EHCI driver from a platform specific directory to the standard driver/usb/host dir.
This is a preparation needed to share this driver between Tegra20 and Tegra30. No functional change in here, so Tegra30 is still not working.
Patch 6 could be a lot smaller if it were generated with -B, as GIT would detect that most of it is moving stuff over, but last time I did this it prevented git apply to work. So sorry for the big diff.
I think I incorporated all changes needed to reflect the review feedback I got on this last time.
V3 is rebased onto u-boot-tegra/next, fixes a build warning and has Simons acked-by attached to the patches.
I expect this series to go in through the Tegra tree. Marek, I suppose you are OK with the series, as you already were about to apply them in V2 form, please ACK so Tom can pick them up.
Lucas Stach (7):
tegra: usb: setUSB_PORTS_MAXto correct value
tegra: usb: make controller init functions more self contained
tegra: usb: remove unneeded function parameter
tegra: usb: move controller init intostart_port
tegra: usb: various small cleanups
tegra: usb: move implementation into right directory
tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
Quoted 14 lines
arch/arm/cpu/armv7/tegra20/Makefile | 1 - arch/arm/cpu/armv7/tegra20/usb.c | 567 ------------------------------ arch/arm/include/asm/arch-tegra/usb.h | 249 +++++++++++++ arch/arm/include/asm/arch-tegra20/tegra.h | 1 - arch/arm/include/asm/arch-tegra20/usb.h | 271 -------------- arch/arm/include/asm/arch-tegra30/tegra.h | 2 + board/nvidia/common/board.c | 2 +- drivers/usb/host/ehci-tegra.c | 546 +++++++++++++++++++++++++++- 8 files changed, 782 insertions(+), 857 deletions(-) delete mode 100644 arch/arm/cpu/armv7/tegra20/usb.c create mode 100644 arch/arm/include/asm/arch-tegra/usb.h delete mode 100644 arch/arm/include/asm/arch-tegra20/usb.h
These will go through the tegra tree, yes? Otherwise I'm fine with these patches.
Best regards,
Marek Vasut