at91sam9x5ek: add spi and mci support

HI,
v3: rebase on the v3 of at91sam9xek i2c support

with this +1 patch serie the support of the at91sam9x5ek is mostly complete

This will add spi and mci0 support as spi0 and mci0 conflict

We are still missing framebuffer, usb host and device and hardware i2c support but this wil be added later

This patch serie depedsn on the at91sam9x5ek i2c and m25p80 patcheries

the correct version

this one work but brake the etherent as it mux the 4 cs as gpio and we use them on the eth0

The following changes since commit b3a0963d358e14180e9bbde68ab78fdebae071b7:

m25p80: sync flash support with the kernel (2012-11-03 04:23:15 +0800)

are available in the git repository at:

git://git.jcrosoft.org/barebox.git delivery/at91sam9x5ek_mci_spi

for you to fetch changes up to dc7e1ce2a4ca879d07ba5786cfaa84f54d2ee763:

at91sam9x5ek: add mci support (2012-11-03 04:23:48 +0800)

----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (4):
at91sam9x5: add spi support
at91sam9x5ek: add spi support
at91sam9x5: add mci support
at91sam9x5ek: add mci support

 arch/arm/boards/at91sam9x5ek/init.c     |   57 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/configs/at91sam9x5ek_defconfig |   10 +++++++---
 arch/arm/mach-at91/at91sam9x5.c         |    4 ++++
 arch/arm/mach-at91/at91sam9x5_devices.c |  124 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 192 insertions(+), 3 deletions(-)

Best Regards,
J.

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox