Skip to content

mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode

Marek Vasut u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest9 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
2/9mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode+0 -01 reply
2/9mx23: Use XFER_COUNT field in HW_SSP_CTRL0 register in MMC PIO mode+0 -00 replies
3/9mx23: Fix transfer size setting for SPI+0 -01 reply
3/9mx23: Fix transfer size setting for SPI+0 -00 replies
3/9mx23: Fix transfer size setting for SPI+0 -00 replies
4/9mx23evk: Add initial board support+0 -01 reply
4/9mx23evk: Add initial board support+0 -00 replies
4/9mx23evk: Add initial board support+0 -00 replies
5/9mx23_olinuxino: Add MMC support+0 -01 reply
6/9mx23_olinuxino: Skip MMC Card detection+0 -01 reply
6/9mx23_olinuxino: Skip MMC Card detection+0 -00 replies
7/9mx23_olinuxino: Add default environment+0 -01 reply
8/9mxs: Fix MMC reset to avoid write errors and timeout in iMX23+0 -01 reply
8/9mxs: Fix MMC reset to avoid write errors and timeout in iMX23+0 -00 replies
9/9mx23: Use PIO mode support for MMC+0 -03 replies
9/9mx23: Use PIO mode support for MMC+0 -00 replies
9/9mx23: Use PIO mode support for MMC+0 -01 reply
9/9mx23: Use PIO mode support for MMC+0 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread