thermal: Marvell SoC thermal formula fixes
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Andrew Lunn |
|---|---|
| Series | A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH for 3.9 0/2] thermal: Marvell SoC thermal formula fixes
Quoted 26 lines · Zhang Rui
Hi,
Ezequiel, thanks for your patch.
Quoted 11 lines · Ezequiel Garcia
This is a small patchset that fixes thermal sensor formulas for Kirkwood and Dove thermal driver. The old formulas had been taken from 88AP510 public datasheets which appears to be slightly wrong.
The current formula comes from Marvell internal documentation and has been confirmed by Lior Amsalem.
This has been tested on a Kirkwood board (Openblocks A6) only. If at all possible, I would like to have the Dove fix tested before this is merged.
Quoted 9 lines
Please note that this fix was previously part of a bigger thermal patchset [1]. I've taken this out so it can be applied on v3.9 first.
[1] http://www.spinics.net/lists/arm-kernel/msg231697.html
Ezequiel Garcia (2):
thermal: kirkwood: Fix thermal sensor formula
thermal: dove: Fix thermal sensor formula
Quoted 5 lines
Nobuhiro and Andrew,
what do you think of these patches?
As I have no idea of the hardware details, I need your comments before applying them.
I have no access to the internal documentation, so i cannot say if this formula is correct or not. However, Lior Amsalem should be in the know.
Andrew