Skip to content

RFC ARM: OMAP2+: Add command line parameter for debugSS module control

Tony Lindgren linux-arm-kernel linux-media linux-omap u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest2 of 3 patches 0 repliesNew

2 of 3 patches are in this archive. The cover letter announces 3.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
3/3ARM: OMAP2+: Add command line parameter for debugSS module control+0 -01 reply
3/3ARM: OMAP2+: Add command line parameter for debugSS module control+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC PATCH 0/3] ARM: OMAP2+: Add command line parameter for debugSS module control
Quoted 8 lines · Hiremath, Vaibhav
Quoted 8 lines

From: Hiremath, Vaibhav
This patch introduces new kernel parameter "omap_debugss_en", which will allow user to control debugSS module enable/disable part during boot-time.

In case of OMAP3, the debugSS is part of EMU domain and is currently controlled by clock tree alone.

Quoted 8 lines
Quoted 6 lines

In case of OMAP4, the debugSS is part of EMU domain and is currently controlled by clock tree, as MODULEMODE_SWCTRL is not defined for hwmod.

In case of AM335x, the debugSS is in wakeup domain and is currently controlled through hwmod alone. Currently we keep it always enabled.

Any comments or input on this patch series?

No comments on adding the clocks, but the enabling of them should be just a regular device driver.

Regards,

Tony