Skip to content

Xilinx Zynq patches

Tom Rini u-boot 1 version New

Get series with b4
b4 am 20130423161636.GH14952@bill-the-cat

Versions newest first

  1. v2 Latest0 of 15 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 15 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchTom Rini
SeriesR-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/15] Xilinx Zynq patches
Quoted 68 lines · Michal Simek

Patchset contains several patches which improve Xilinx Zynq arm port. Patchset contain:
- core changes
- gem updates
- mmc support
- i2c support
- pl support

I am sending them in one package because driver depends on each other in zynq shared files.

Thanks for your comments,
Michal

P.S.: The first version sent by patman that's why sorry for any mistake.

Changes in v2:
- New patch in this series to reflect Tom's comments
- Remove XPSS_ prefix and replace it with ZYNQ
- Remove CONFIG_ prefix from non configurable macros (scutimer)
- Remove CONFIG_ prefix from non configurable macro (gem)
- Remove CONFIG_ prefix from non configurable macros (emio)
- Remove CONFIG_ prefix from non configurable macros (sdhci)
- Remove CONFIG_ prefix from non configurable macros (i2c)
- Fix checkpatch warnings (i2c)
- Fix #define<space>Macro name (i2c)
- Fix multiline comments (i2c)
- Remove trailing 1 for configurations (i2c)
- Fix bugs reported by Tom Rini
- Fix checkpatch warnings (fpga)
- Fix comments (fpga)
- Do not use CamelCase for XilinxZynq (fpga)

David Andrey (3):
arm: zynq: U-Boot udelay < 1000 FIX
net: gem: Pass phy address to init
net: gem: Preserve clk on emio interface

Michal Simek (12):
arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC addresses
zynq: Move scutimer baseaddr to hardware.h
net: phy: Define Marvell 88e1518 phy
net: gem: Remove WRAP bit from TX buffer description
net: gem: Simplify return path in zynq_gem_recv
net: gem: Do not initialize BDs again
net: gem: Fix gem driver on 1Gbps LAN
zynq: Move macros to hardware.h
net: gem: Add support for phy autodetection
mmc: Add support for Xilinx Zynq sdhci controller
i2c: zynq: Add support for Xilinx Zynq
fpga: Add support for loading bitstream for Xilinx Zynq

 arch/arm/cpu/armv7/zynq/slcr.c             |  61 ++++++
 arch/arm/cpu/armv7/zynq/timer.c            |  49 ++++-
 arch/arm/include/asm/arch-zynq/hardware.h  |  36 +++-
 arch/arm/include/asm/arch-zynq/sys_proto.h |   7 +
 board/xilinx/zynq/board.c                  |  66 ++++++-
 drivers/fpga/Makefile                      |   1 +
 drivers/fpga/xilinx.c                      |  37 ++++
 drivers/fpga/zynqpl.c                      | 231 ++++++++++++++++++++++
 drivers/i2c/Makefile                       |   1 +
 drivers/i2c/zynq_i2c.c                     | 306 +++++++++++++++++++++++++++++
 drivers/mmc/Makefile                       |   1 +
 drivers/mmc/zynq_sdhci.c                   |  40 ++++
 drivers/net/phy/marvell.c                  |  11 ++
 drivers/net/zynq_gem.c                     | 199 +++++++++++++------
 include/configs/zynq.h                     |  39 +++-
Quoted 8 lines
 include/netdev.h                           |   2 +-
 include/xilinx.h                           |   4 +
 include/zynqpl.h                           |  59 ++++++
 18 files changed, 1065 insertions(+), 85 deletions(-)
 create mode 100644 drivers/fpga/zynqpl.c
 create mode 100644 drivers/i2c/zynq_i2c.c
 create mode 100644 drivers/mmc/zynq_sdhci.c
 create mode 100644 include/zynqpl.h

For the series:

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130423/8a99e61c/attachment.pgp>