WLAN support for omap4 when booted with devicetree
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] WLAN support for omap4 when booted with devicetree
Quoted 6 lines · Luciano Coelho
Quoted 1 line · Tony Lindgren
Hi all,
Hi Tony,
Quoted 6 lines
Quoted 3 lines
Here are some patches against linux next to make WLAN to work with device tree. Note that we still are initializing wl12xx with pdata, but so far it looks like only minimal binding for it is needed.
Thanks for doing this! I've been out on vacation for the past 3 weeks, so I didn't manage to finish the wl12xx DT stuff in time for 3.10. :(
OK I was wondering what happened..
Quoted 7 lines
Quoted 3 lines
There are various fixes pending posted recently, but at least the fix "[PATCH] mmc:
omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5" is needed.I managed to apply the OMAP2+ and the blaze patches. There were conflicts with the panda patch, so I skipped it for now. I'll come back to it a bit later.
OK
Quoted 6 lines
Quoted 2 lines
Please test on blaze/sdp if you have a chance, I don't have the connectivity card on mine.
I tested this on Blaze and it seems to work fine! The driver gets probed and I can power the chip on and off (by putting the interface up and down) without any problems. :)
OK great thanks! It took me few hours of debugging to figure out that it does not work on my blaze as I did not have the wl12xx card in it :)
Also can you fill in the missing GPIO lines for blaze from the schematics?
Quoted 2 lines
BTW, did you (or anyone else) manage to get ethernet to work on Blaze (or Panda) with DT?
Yes that needs the two GPIO fixes posted by Jon Hunter last week. One for patching in the GPIO trigger type to both omap4-sdp.dts, and the other one is "gpio/omap: ensure gpio context is initialised".
Regards,
Tony