Skip to content

mx23: Make DDR initialization stable

Marek Vasut u-boot 2 versions New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest0 of 7 patches 0 repliesNew
  2. v30 of 9 patches 0 repliesSuperseded

Patches in v5 No applies recorded yet

None of the 7 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchMarek Vasut
SeriesA-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [U-Boot] [PATCH v5 0/7] mx23: Make DDR initialization stable

Dear Fabio Estevam,

Quoted 11 lines

Prior to this series running 'memtester' utility in Linux on a mx23evk always resulted in many errors during stress testing, if the kernel is loaded via U-boot.

Running the same test and loading the kernel via FSL bootlets resulted on zero errors.

Adjust U-boot so that it can also pass the 'memtester' stress test.

After this series was applied, no more DDR errors were observed on a mx23evk.

Whole series

Best regards,
Marek Vasut