Skip to content

Switch internal registers address to 0xF1 on Armada 370/XP

Thomas Petazzoni linux-arm-kernel 1 version New

Get series with b4
b4 am 20130522155218.1c2af492@skate

Versions newest first

  1. v1 Latest0 of 9 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP

Dear Russell King - ARM Linux,

Quoted 8 lines · Russell King - ARM Linux
Quoted 4 lines · Sebastian Hesselbarth

I tried the above on Dove which is possibly affected by the workaround as it is also ARMv7. In Dove you can access unmapped addresses without any problems, but as Thomas already stated Armada 370/XP just hang. Must be some default AHB slave in Dove, which Armada 370/XP is missing.

It may be some clock setting somewhere on the 370/XP. The Dove will hang as well if you prod at peripherals which you've turned their clocks off.

The register in question (offset 0x20080 from the base address of the internal register) is part of the "core" registers, so I clearly don't see how the system could even be booting if this clock was gated. No?

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com