Skip to content

Switch internal registers address to 0xF1 on Armada 370/XP

Thomas Petazzoni linux-arm-kernel 1 version New

Get series with b4
b4 am 20130522233108.01cb51f0@skate

Versions newest first

  1. v1 Latest0 of 9 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP

Dear Arnd Bergmann,

Quoted 11 lines · Arnd Bergmann
Quoted 7 lines

So you're proposing to add two Kconfig options, one to have the UART at 0xd0012000 and the other one to have the UART at 0xf1012000. The user would have to know whether he is going to boot with an old bootloader or new bootloader, and select the appropriate option. This means that the mvebu_defconfig would no longer be able to have earlyprintk enabled by default, otherwise the resulting kernel may not boot for some people, but maybe it's a reasonable tradeoff.

Yes. It may also be reasonable to use the CP15 hack for DEBUG_LL, but I would not like to see that information getting used anywhere in the kernel outside of DEBUG_LL. That should really come from the DT.

Ok.

Quoted 7 lines
Quoted 7 lines

Conclusion: you can't classify on one side boards that are at 0xd0 and boards that are at 0xf1. It depends on which bootloader each particular instance of those boards will be using. Will it be a bootloader that complies with the "old" protocol (CP15 bit cleared and registers at 0xd0) or the "new" protocol (CP15 bit set and registers at 0xf1).

Quoted 7 lines
Quoted 3 lines

So we can't encode into the boards Device Tree whether the registers are at 0xd0 or 0xf1, because it's not a board-related information, but a bootloader-related information.

The new boot loaders will of course know that they are remapping the registers, so they are also able to put the correct information into the DT.

The thing that I believe you don't realize is that those new bootloaders are already shipping *today*. And they are not putting whatever "correct" information into the DT you believe they should be putting.

So what do we do, today, with those new bootloaders, that are not the future, but the present. Again, they do *not* add any information in the DT that allows us to know that they have remapped the registers to 0xf1.

Best regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com