Skip to content

Marvell PCIe driver improvements

Willy Tarreau linux-arm-kernel linux-pci 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 4 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchWilly Tarreau
SeriesT-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/4] Marvell PCIe driver improvements
Quoted 8 lines · Thomas Petazzoni
Quoted 7 lines

FWIW, these patches applied on top of your pcie-v10 tree have made my mini-pcie dual-nic appear for the first time on the mirabox. Till now I never knew if it was a hardware or software issue since the NIC does not appear in u-boot nor lspci, whatever the kernel versions, including the original Marvell one's. The NIC has two functions (one per controller) and no bridge, so it may be a side effect of your improvements (or maybe you fixed a bug).

Quoted 4 lines

Hum, interesting. Can you show the output of lspci -v and lspci -t (which a pciutils version of lspci, not Busybox one) ? I'm interested in seeing the layout of the PCIe bus with such a device, to get a better understanding.

(send privately in another thread).

Quoted 8 lines
Quoted 6 lines

Anyway for me it's a great improvement !

I've not tried it on the OpenBlocks AX3 yet (it was not detected there previously). But I have good hopes.

For reference, the NIC is Jetway's ADMPEIDLA (intel i350-AM2).

Should I be taking this as a formal Tested-by from you? :-)

Yes, obviously, feel free to add this one :

Willy