Skip to content

Switch internal registers address to 0xF1 on Armada 370/XP

Arnd Bergmann linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 9 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP
Quoted 6 lines · Thomas Petazzoni

But that's not the case. Neither the old nor the new bootloaders are changing the Device Tree in any way that allows us to know whether registers are mapped at 0xd0 and 0xf1. Those bootloaders are already in the field, and we have little control over that. Even if we had control, what we would tell Marvell to implement in their U-Boot, today?

We would tell Marvell that changing the base address was a horrible mistake and that they have to revert to 0xd0 in order to make sure the mistake does not spread any further and all users would update.

Quoted 3 lines

The DT binding of the mbus driver is not complete, and therefore the mechanism to specify the location of the internal registers is going to change when we introduce the DT binding for the mbus driver.

Right. It should not be hard to agree on the binding at least, but you are correct that we don't have that today and we shouldn't rush things here.

Arnd