Skip to content

Switch internal registers address to 0xF1 on Armada 370/XP

Thomas Petazzoni linux-arm-kernel 1 version New

Get series with b4
b4 am 20130524094313.669ab838@skate

Versions newest first

  1. v1 Latest0 of 9 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 9 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/9] Switch internal registers address to 0xF1 on Armada 370/XP

Dear Russell King - ARM Linux,

Quoted 5 lines · Russell King - ARM Linux

Wrong, again. Thomas has already said there are boot loaders shipping on boards which have the registers programmed to be at 0xf1xxxxxx _and_ there's boards with boot loaders programmed for 0xd0xxxxxx.

The problem is here TODAY.

Right. And again, don't expect something like:

* Board A = 0xd0xxxxxx
* Board B = 0xf1xxxxxx

Depending on which bootloader, and which version of the bootloader you run, on a given board, the kernel may be booted with 0xd0 or 0xf1.

And again, again. This 0xd0 was a mistake. We don't want to support moving forward. The only thing we want to support is 0xf1, nothing else.

All the proposal is about a temporary workaround, just to make the transition smoother.

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com