ARM: kirkwood: improve pinmux configs in Device Tree
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 21 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 21 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Andrew Lunn |
|---|---|
| Series | T-b A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 00/21] ARM: kirkwood: improve pinmux configs in Device Tree
Quoted 81 lines · Thomas Petazzoni
Hello,
This series of patches has the goal of adding support for the Init button on OpenBlocks A6, but takes this opportunity to do a little bit of cleanup in the pinmux configurations of the various Kirkwood Device Trees.
Until now, all pinmux configurations were "owned" by the pinctrl driver, because back when they were introduced, the driver core was not selecting the pinmux configuration, each driver had to do it manually (and not all drivers were doing so). Now that the driver core selects the default pinmux configuration when available, it makes sense to associate the pinmux configuration to the particular device it is related to.
It allows pinctrl to show nice informations in debugfs, which associates a particular pin with the particular device using it:
# cat pinctrl/f1010000.pinctrl/pinmux-pins Pinmux settings per pin Format: pin (name): mux_owner gpio_owner hog? pin 0 (PIN0): f4000000.nand (GPIO UNCLAIMED) function nand group mpp0 pin 1 (PIN1): f4000000.nand (GPIO UNCLAIMED) function nand group mpp1 pin 2 (PIN2): f4000000.nand (GPIO UNCLAIMED) function nand group mpp2 pin 3 (PIN3): f4000000.nand (GPIO UNCLAIMED) function nand group mpp3 pin 4 (PIN4): f4000000.nand (GPIO UNCLAIMED) function nand group mpp4 pin 5 (PIN5): f4000000.nand (GPIO UNCLAIMED) function nand group mpp5 pin 6 (PIN6): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 7 (PIN7): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 8 (PIN8): f1012100.serial (GPIO UNCLAIMED) function uart1 group mpp8 pin 9 (PIN9): f1012100.serial (GPIO UNCLAIMED) function uart1 group mpp9 pin 10 (PIN10): f1012000.serial (GPIO UNCLAIMED) function uart0 group mpp10 pin 11 (PIN11): f1012000.serial (GPIO UNCLAIMED) function uart0 group mpp11 pin 12 (PIN12): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 13 (PIN13): f1012100.serial (GPIO UNCLAIMED) function uart1 group mpp13 pin 14 (PIN14): f1012100.serial (GPIO UNCLAIMED) function uart1 group mpp14 pin 15 (PIN15): f1012000.serial (GPIO UNCLAIMED) function uart0 group mpp15 pin 16 (PIN16): f1012000.serial (GPIO UNCLAIMED) function uart0 group mpp16 pin 17 (PIN17): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 18 (PIN18): f4000000.nand (GPIO UNCLAIMED) function nand group mpp18 pin 19 (PIN19): f4000000.nand (GPIO UNCLAIMED) function nand group mpp19 pin 20 (PIN20): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp20 pin 21 (PIN21): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp21 pin 22 (PIN22): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp22 pin 23 (PIN23): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp23 pin 24 (PIN24): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp24 pin 25 (PIN25): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp25 pin 26 (PIN26): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp26 pin 27 (PIN27): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp27 pin 28 (PIN28): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp28 pin 29 (PIN29): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp29 pin 30 (PIN30): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp30 pin 31 (PIN31): f1010000.pinctrl (GPIO UNCLAIMED) (HOG) function gpio group mpp31 pin 32 (PIN32): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 33 (PIN33): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 34 (PIN34): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 35 (PIN35): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 36 (PIN36): f1011100.i2c (GPIO UNCLAIMED) function twsi1 group mpp36 pin 37 (PIN37): f1011100.i2c (GPIO UNCLAIMED) function twsi1 group mpp37 pin 38 (PIN38): gpio_keys.2 mvebu-gpio:38 function gpio group mpp38 pin 39 (PIN39): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 40 (PIN40): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 41 (PIN41): gpio-leds.1 mvebu-gpio:41 function gpio group mpp41 pin 42 (PIN42): gpio-leds.1 mvebu-gpio:42 function gpio group mpp42 pin 43 (PIN43): gpio-leds.1 mvebu-gpio:43 function gpio group mpp43 pin 44 (PIN44): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 45 (PIN45): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 46 (PIN46): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 47 (PIN47): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 48 (PIN48): (MUX UNCLAIMED) (GPIO UNCLAIMED) pin 49 (PIN49): (MUX UNCLAIMED) (GPIO UNCLAIMED)Without this patch set, all pins appear to be owned by "f1010000.pinctrl".
Even though GPIO muxing is automatically done when a device driver requests a GPIO, Andrew Lunn and I had agreed to make the pinmuxing explicit, in order to have correct informations in debugfs. See our discussion at
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-March/158190.html.
Quoted 6 lines
The last patch finally adds support for the init button of the Plathome OpenBlocks A6 platform.
Best regards,
Thomas
Hi Thomas, Jason
You can add a
to the topkick and ts219 patches, and a general
to the rest.
Andrew
Quoted 59 lines
Thomas Petazzoni (21):
arm: kirkwood: cloudbox: affect pinmux configs to the right devices
arm: kirkwood: dlink dns: affect pinmux configs to the right devices
arm: kirkwood: dockstar: affect pinmux configs to the right devices
arm: kirkwood: dreamplug: affect pinmux configs to the right devices
arm: kirkwood: goflexnet: affect pinmux configs to the right devices
arm: kirkwood: guruplug: affect pinmux configs to the right devices
arm: kirkwood: ib62x0: affect pinmux configs to the right devices
arm: kirkwood: iconnect: give meaningful names to pinmux configs
arm: kirkwood: iconnect: affect pinmux configs to the right devices
arm: kirkwood: iomega ix2-200: affect pinmux configs to the right
devices
arm: kirkwood: ns2: affect pinmux configs to the right devices
arm: kirkwood: keymile: affect pinmux configs to the right devices
arm: kirkwood: buffalo linkstation: affect pinmux configs to the
right devices
arm: kirkwood: mplcec4: affect pinmux configs to the right devices
arm: kirkwood: readynas: affect pinmux configs to the right devices
arm: kirkwood: nsa310: affect pinmux configs to the right devices
arm: kirkwood:openblocks_a6: affect pinmux configs to the right
devices
arm: kirkwood: topkick: affect pinmux configs to the right devices
arm: kirkwood: ts219: affect pinmux configs to the right devices
arm: kirkwood: openblocks-a6: group pinmux configurations
arm: kirkwood: openblocks-a6: add support for Init buttonarch/arm/boot/dts/kirkwood-cloudbox.dts | 10 +- arch/arm/boot/dts/kirkwood-dns320.dts | 7 ++ arch/arm/boot/dts/kirkwood-dns325.dts | 5 + arch/arm/boot/dts/kirkwood-dnskw.dtsi | 32 +++--- arch/arm/boot/dts/kirkwood-dockstar.dts | 9 +- arch/arm/boot/dts/kirkwood-dreamplug.dts | 11 +- arch/arm/boot/dts/kirkwood-goflexnet.dts | 18 ++-- .../arm/boot/dts/kirkwood-guruplug-server-plus.dts | 8 +- arch/arm/boot/dts/kirkwood-ib62x0.dts | 17 +-- arch/arm/boot/dts/kirkwood-iconnect.dts | 36 +++---- arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts | 15 +-- arch/arm/boot/dts/kirkwood-is2.dts | 2 + arch/arm/boot/dts/kirkwood-km_kirkwood.dts | 6 +- arch/arm/boot/dts/kirkwood-lsxl.dtsi | 22 ++-- arch/arm/boot/dts/kirkwood-mplcec4.dts | 23 +++-- .../boot/dts/kirkwood-netgear_readynas_duo_v2.dts | 22 ++-- arch/arm/boot/dts/kirkwood-ns2-common.dtsi | 10 +- arch/arm/boot/dts/kirkwood-ns2.dts | 2 + arch/arm/boot/dts/kirkwood-ns2lite.dts | 2 + arch/arm/boot/dts/kirkwood-ns2max.dts | 2 + arch/arm/boot/dts/kirkwood-ns2mini.dts | 2 + arch/arm/boot/dts/kirkwood-nsa310.dts | 29 +++--- arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 108 ++++++-------------- arch/arm/boot/dts/kirkwood-topkick.dts | 51 ++++----- arch/arm/boot/dts/kirkwood-ts219-6281.dts | 8 +- arch/arm/boot/dts/kirkwood-ts219-6282.dts | 8 +- arch/arm/boot/dts/kirkwood-ts219.dtsi | 10 ++ 27 files changed, 235 insertions(+), 240 deletions(-)Signature · 1 line
1.7.9.5