RFC first pass converting omap4 clock data to DT
Get series with b4
b4 am 20130605064545.10233.72880@quantumVersions newest first
- v1 RFC Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH RFC 0/3] first pass converting omap4 clock data to DT
Quoting Tero Kristo (2013-06-04 06:28:54)
Quoted 24 lines
Hi Mike,
Quoted 4 lines · Mike Turquette
This is a very incomplete conversion of a handful of OMAP4 PRCM clocks from the statically defined clock data in
arch/arm/mach-omap2/cclock44xx_data.cto a new dts file inarch/arm/boot/dts/omap4-clocks.dtsi.I gave a quick try for this set and it seems to be working nicely, so for at least me this approach is fine. Feel free to add tested-by me if you like (for the basic clock bindings also.) Can't comment much on the DT stuff though as my experience is rather limited on it.
Quoted 10 lines
I am not a DT expert so many of the choices here may be quite disgusting to look at, or may be on the right path. In particular I simply include the new
omap4-clocks.dtsifromomap4.dtsi, which feels a bit kludgey. Also this series depends on the basic clock bindings RFC I posted earlier today[1].I actually have an
omap4-clock.dtsifile with many more clocks converted to the mux-clock, divider-clock, fixed-clock, fixed-factor and (unpublished) gate-clock bindings in my local repo, but it is not currently booting. I wanted to get this early preview out regardless.
Quoted 5 lines
Any way I can get access to your local tree? Can you push a branch somewhere? I could provide you debugging support on this at least, as I spent quite a bit of time earlier moving the clock data under
drivers/clk... I guess you are probably seeing similar issues I faced.
I'll be pushing changes to my github tree:git://github.com/mturquette/linux.git clk-next-omap-dt
https://github.com/mturquette/linux/tree/clk-next-omap-dt
For now it is just this series based on the prerequisites, based on clk-next, based on -rc3.
Regards,
Mike
Quoted 23 lines
-Tero
Quoted 21 lines
[1] http://article.gmane.org/gmane.linux.kernel/1501216
Mike Turquette (3):
clk: omap: introduce clock driver
ARM: dts: omap4 clock data
ARM: omap4: register DT clocks & remove old dataarch/arm/boot/dts/omap4-clocks.dtsi | 128 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap4.dtsi | 2 + arch/arm/mach-omap2/cclock44xx_data.c | 54 ++------------ drivers/clk/Makefile | 1 + drivers/clk/omap/Makefile | 1 + drivers/clk/omap/clk.c | 55 +++++++++++++++ include/linux/clk/omap.h | 24 +++++++ 7 files changed, 217 insertions(+), 48 deletions(-) create mode 100644 arch/arm/boot/dts/omap4-clocks.dtsi create mode 100644 drivers/clk/omap/Makefile create mode 100644 drivers/clk/omap/clk.c create mode 100644 include/linux/clk/omap.h