Skip to content

arm, da850: add ipam390 board support

Tom Rini u-boot 1 version New

Get series with b4
b4 am 20130816133521.GF13632@bill-the-cat

Versions newest first

  1. v1 Latest0 of 4 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/4] arm, da850: add ipam390 board support
Quoted 45 lines · Heiko Schocher

add the am1808 based ipam390 board from Barix.

- 128MByte, DDR2, synchronous RAM 16bit databus to SDRAM interface
- 128MByte, NAND Flash, 8bit databus to the NANDFlash Interface
- Ethernet PHY Micrel KSZ8051R via RMII
- Console on UART 0
- booting fron nand flash
- spl falcon bootmode

Needed patches posted on the ML but not yet in mainline:
- [U-Boot,05/10] arm: spl: For Falcon Mode, set a default machid of ~0
http://patchwork.ozlabs.org/patch/264336/

applies on git://git.denx.de/u-boot-ti.git master
last commit:

commit 500a0daeecf36b72797c53ef78d9ad096a464d32
Author: Dan Murphy <[email protected]>
Date: Thu Jul 11 13:10:27 2013 -0500
gpio: tca642x: Add the tca642x gpio expander driver

I am on vacation for two weeks, so I maybe not able to respond immediately but as the merge window closes soon, I post this board support now ...

Heiko Schocher (4):
arm/davinci/da850: add uart0_pins_rtscts and RMII_MHz_50_CLK in
emac_pins_rmii pinmux
bootstage: get more BOOTSTAGE_ID* in show_boot_progress() arm, da850: enable the correct uart in arch_cpu_init() arm, da850: add ipam390 board support

 MAINTAINERS                                     |   1 +
 arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c |   4 +
 arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c   |   6 +
 arch/arm/include/asm/arch-davinci/pinmux_defs.h |   3 +-
 board/Barix/ipam390/Makefile                    |  29 ++
 board/Barix/ipam390/README.ipam390              | 229 ++++++++++++++++
 board/Barix/ipam390/ipam390-ais-uart.cfg        | 202 ++++++++++++++
 board/Barix/ipam390/ipam390.c                   | 348 ++++++++++++++++++++++++
 board/Barix/ipam390/u-boot-spl-ipam390.lds      |  53 ++++
 boards.cfg                                      |   1 +
 include/bootstage.h                             |   1 +
Quoted 8 lines
 include/configs/ipam390.h                       | 331 ++++++++++++++++++++++
 12 Dateien ge??ndert, 1207 Zeilen hinzugef??gt(+), 1 Zeile entfernt(-)
 create mode 100644 board/Barix/ipam390/Makefile
 create mode 100644 board/Barix/ipam390/README.ipam390
 create mode 100644 board/Barix/ipam390/ipam390-ais-uart.cfg
 create mode 100644 board/Barix/ipam390/ipam390.c
 create mode 100644 board/Barix/ipam390/u-boot-spl-ipam390.lds
 create mode 100644 include/configs/ipam390.h

Applied to u-boot-ti/master, thanks.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130816/1efd197a/attachment.pgp>

Read the cover letter in its thread