Skip to content

ARM: OMAP2+: AM33XX: VDD CORE OPP50 support

Mark Brown linux-arm-kernel linux-devicetree linux-omap 6 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest posting 6/60 of 4 patches 0 repliesNew
  2. v4 posting 5/60 of 4 patches 0 repliesSuperseded
  3. v4 posting 4/60 of 4 patches 0 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v4 posting 3/60 of 4 patches0 repliesSuperseded
v4 posting 2/60 of 4 patches0 repliesSuperseded
v4 posting 1/60 of 4 patches0 repliesSuperseded

Patches in v4 posting 6/6 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH v4 0/4] ARM: OMAP2+: AM33XX: VDD CORE OPP50 support
Quoted 8 lines · Russ Dill
Quoted 5 lines · Mark Brown

I was thinking about the majority of regulators where setting a voltage would be a single bitfield update (plus ramp delay, which is going to need to be accounted for in the power on case). If we need to do longer sequences things get a bit more tricky in terms of interface but it seems doable.

Quoted 6 lines

The sequence for TPS65217 on beaglebone is rather long, it's 8 register writes. It has to write the new value to the DCDC3 register and the apply bit to the DCDC register, but both registers are password locked registers. The password sequence is to write the password register, then the register, then the password register again, then the register again.

Oh dear, that's a bit annoying. It's doable obviously if people decide
to go down that route but it's work and this is a very common system.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130903/76f33bcf/attachment-0001.sig>