Add the Quadspi driver for vf610-twr
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest posting 2/20 of 8 patches 0 repliesNew
- v3 posting 1/20 of 8 patches 0 repliesSuperseded
Patches in v3 posting 2/2 No applies recorded yet
None of the 8 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 0/8] Add the Quadspi driver for vf610-twr
Quoted 9 lines · Gerhard Sittig
I liked the S25F datasheet that was referenced here recently, it's useful for the discussion that is going on here. I liked the "Serial Peripheral Interface with Multi-I/O" subtitle, which suggests that SPI gets enhanced while nothing of it is specific to flash chips. And I liked the sequence diagrams for their overview or introduction nature, which you can compare to the SPI message submission API in the Linux kernel which connects SPI slave drivers and SPI controller drivers.
noticed that I should have provided the URL so those interested need not search in the thread
www.spansion.com/Support/Datasheets/S25FL128S_256S_00.pdf
Quoted 2 lines
The datasheet had "block diagrams" (section 3.16) [ ... ] And the datasheet had "sequence diagrams" (section 4.2.1) [ ... ]
and the relevant design items for the SPI subsystem are:
- express those "phases" of communicating a flash chip related "command" in terms of SPI message submission data structures (spi_message, spi_transfer)
- make new SPI master drivers support the optional data rate, multi-line transfer, dummy bit times, etc features _if_ their controller hardware supports them
- announce support of these optional features such that slave drivers can query them
- make SPI slave drivers (specifically SPI attached MTD, i.e. m25p80) map their flash access operations to respective SPI transactions, by introducing an appropriate translation helper
and keep all of the "enhanced modes of SPI communication" independent from their motivation by and use in flash chip drivers
and keep internals of one specific flash chip instruction set out of the SPI transport layer
virtually yours
Gerhard Sittig
Signature · 3 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr. 5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de