add support for omap wake-up interrupts via pinctrl-single, take2
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 6 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 6 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/6] add support for omap wake-up interrupts via pinctrl-single, take2
Quoted 11 lines · Kevin Hilman
Quoted 8 lines · Tony Lindgren
Here's a respin of the pinctrl-single related patches to use chained irq as suggested by Linus W earlier. This series does not try to provide any generic automated solution yet, but works by doing a
request_irq()for the wake-up pin, so it should be flexible enough for both manual control and automated solution.This series removes the last nasty blocker for making omap3 to be device tree only without causing nasty PM regressions.
Quoted 8 lines
Indeed, I gave this a spin on several OMAP3 platforms with legacy boot and ran through a series of retention and off-mode tests for idle and suspend with both UART and RTC wakeups. No regressions found. So...
Reviewed-by Kevin Hilman <[email protected]>Tested-by Kevin Hilman <[email protected]>on 3530/beagle, 3730/beagle-xM, 3530/Overo, 3730/Overo STORM
Thanks for testing, applying these into omap-for-v3.13/quirk because of the dependencies.
Regards,
Tony