Skip to content

PCI: imx6: Random fixes

Marek Vasut linux-arm-kernel linux-pci 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 6 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchShawn Guo
SeriesA-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/6] PCI: imx6: Random fixes

Dear Bjorn Helgaas,

Quoted 27 lines · Marek Vasut
Quoted 19 lines

Set of random fixes for the PCIe driver for i.MX6 . With these fixes, my setup with MX6Q -> PCIe bridge -> i210 ethernet adapter works as expected.

NOTE: I'm sure this will start some discussion. There are quite a few patches

that are more of a hacks. Shawn, I didn't ignore your remark about the clock patches, I will test it ASAP, I just want to have these fixes in the public so others can comment/test.

Marek Vasut (6):
PCI: imx6: Make reset-gpio optional
PCI: imx6: Fix the clock for PCIe
ARM: dts: imx6qdl: Fix the clock for PCIe
PCI: imx6: Probe the PCIe in fs_initcall()
PCI: imx6: Force Gen1 operation
PCI: designware: Fix DT resource retrieval

Quoted 6 lines
 .../devicetree/bindings/pci/designware-pcie.txt    |  2 +-
 arch/arm/boot/dts/imx6qdl.dtsi                     |  4 +-
 drivers/pci/host/pci-imx6.c                        | 63
 ++++++++++++++++------ drivers/pci/host/pcie-designware.c              
   | 17 +++---
 4 files changed, 55 insertions(+), 31 deletions(-)
Quoted 5 lines

I'm ignoring this series for now. I assume you'll post an updated series as mentioned in your Oct 17 response to "[Patch 5/6] PCI: imx6:
Force Gen1 operation." Please mark that series as "v2" when you post it. My assumption is still that Shawn Guo will ack the drivers/pci/host/ pieces before I apply them [1].

Can you maybe pick at least these two:

PCI: imx6: Make reset-gpio optional
PCI: imx6: Probe the PCIe in fs_initcall()

I think they should be harmless and the later one fixes a problem on MX6. I'm now digging in the PCIe MX6 again btw.

Best regards,
Marek Vasut