Skip to content

arm, am33xx: update for the am33xx based siemens boards

Marek Vasut u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 5 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

Dear Vaibhav Bedia,

Quoted 10 lines · Heiko Schocher

[...]

Quoted 1 line

Hups, missed this EMail ... :-(

No problem. Happens all the time :)

Quoted 2 lines

Hmm.. some boards from siemens do not use the RTC, so this approach is not possible here ...

Quoted 7 lines

By unused do you mean it's not powered up or is it simply not programmed?

Even if the RTC is not programmed the register would still be there. I don't have a
board with me to check the behavior but i am guessing the RTC functionality doesn't
need to be used to make use of the scratchpad registers.

If your hardware's IP block's clock are not ungated, the register access to that IP block will usually not work.

Best regards,
Marek Vasut