Add support for SPI based DataImage LCD panel
Get series with b4
b4 am 20131104204957.GC5925@bill-the-catVersions newest first
- v2 Latest0 of 6 patches 0 repliesNew
Patches in v2 No applies recorded yet
None of the 6 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [U-Boot] [PATCH V2 0/6] Add support for SPI based DataImage LCD panel
Quoted 47 lines · Nikita Kiryanov
This patch ports the Linux driver for DataImage SCF0403852GGU04 and SCF0403526GGU20 LCD panels into U-Boot. As a preparation step, variable SPI word length support is added to
omap3_spiand the generic SPI interface. Finally, the driver is used incm_t35board.The SPI changes were tested with a Beagle I2C/SPI/MDIO Protocol Analyzer, and also with a DataImage SCF0403 lcd as part of the DataImage driver test.
Patch number 6 depends on http://patchwork.ozlabs.org/patch/275283/
Cc Tom Rini <[email protected]>Cc Anatolij Gustschin <[email protected]>Cc Igor Grinberg <[email protected]>Cc Jagannadha Sutradharudu Teki <[email protected]>Changes in V2:
- Rebased on top of latest U-Boot
- New patches:
1) spi: omap3: remove semicolon from #define
2) spi: defineSPI_XFER_ONCE
3)omap3_dss: defineDSS_ONOFF
1 is a preliminary cleanup suggested by Gerhard Sittig and Igor Grinberg 2 and 3 are splitting off some new #defines to separate patches
- Moved wordlen to genericspi_slavestruct, and added generic implementation forspi_set_wordlenwhich only updates the struct without touching the hardware (Igor Grinberg)
- Updated wordlen in hardware just before doing SPI transactions, not when changing wordlen (Igor Grinberg)
- OMAP3 specific check of wordlen value from old implementation ofspi_set_wordlenmoved to xfer. It refines the more general check done in the newspi_set_wordlen.
- Fixed comment style inspi.hfollowing a rebase on top of latest U-Boot
- Added SPDX-License-Identifier to all new files (Anatolij Gustschin)
- s/printf/puts for not formatted strings in scf0403 driver (Anatolij Gustschin)
- Do not fail scf0403 driver init if an invalidreset_gpiois given (Igor Grinberg)Nikita Kiryanov (6):
spi: omap3: remove semicolon from #define
spi: omap3: add support for more word lengths
spi: defineSPI_XFER_ONCE
lcd: add DataImage SCF0403x LCD panel support
omap3_dss: defineDSS_ONOFF
cm_t35: use scf0403 driver
Quoted 14 lines
arch/arm/include/asm/arch-omap3/dss.h | 9 +- board/compulab/cm_t35/cm_t35.c | 12 ++ board/compulab/common/omap3_display.c | 46 +++++- drivers/spi/omap3_spi.c | 71 +++++--- drivers/spi/omap3_spi.h | 8 +- drivers/spi/spi.c | 13 ++ drivers/video/Makefile | 1 + drivers/video/scf0403_lcd.c | 296 ++++++++++++++++++++++++++++++++++ include/configs/cm_t35.h | 3 + include/scf0403_lcd.h | 11 ++ include/spi.h | 17 ++ 11 files changed, 456 insertions(+), 31 deletions(-) create mode 100644 drivers/video/scf0403_lcd.c create mode 100644 include/scf0403_lcd.h
Did the mailing list eat the CC? I expect these changes to come in via the spi tree, since Anatolij acked the other parts. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131104/d12efc30/attachment.pgp>