ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/2] ARM: mvebu: fix DT def. of PCIe units for mv78230 and mv78260
Quoted 45 lines · Thomas Petazzoni
Dear Arnaud Ebalard,
Quoted 33 lines · Arnaud Ebalard
Quoted 33 lines
As a side note, Thomas, I noticed one more thing, this time in mv78460 .dtsi when comparing it w/ mv78230 and mv78260 ones. The first address of "assigned-address" property varies in the former for each pcie node:
$ grep assigned-address armada-xp-mv78230.dtsi assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; $ grep assigned-address armada-xp-mv78260.dtsi assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; $ grep assigned-address armada-xp-mv78460.dtsi assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;Quoted 7 lines
Quoted 3 lines
I took at
Documentation/devicetree/bindings/pci/mvebu-pci.txtbut failed to find an answer. Can you explain where the difference comes from?Sorry to bother you again with the one above (it was in the cover letter) but the difference looks quite odd for someone not familiar with the syntax and the semantic.
Quoted 7 lines
I do still have this question in mind, I wanted to reply to it today but just hadn't had the time to do it. I'm adding Jason Gunthorpe in Cc because he knows better than me the precise meaning of assigned-addresses. If it doesn't reply, I'll try to have a look tomorrow. This is the kind of stuff I can't answer without concentrating for a bit of time to re-understand again how it all fits together :-)
In this context the assigned-addresses encodes the PCI device bus function as well as the BAR #.
This PCI stuff would be 100% more readable with some macros ..
#define PCI_REG_BDF(bus,device,function) (....) #define PCI_MEM_BAR_BDF(bus,device,function,bar) \
(0x82000000 | PCI_REG_BDF(bus,device,function) + bar*XX) 0)
So that:
reg = <PCI_REG_BDF(0,1,0) 0 0>
assigned-addresses = <PCI_MEM_BAR_BDF(0,1,0,0) 0x40000 0 0x2000>
When done properly the assigned-address and reg should have the same BDF. As you've noticed there is a copy and paste mistake in some of the dts's:
eg:
pcie at 2,0 {
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1000 0 0 0 0>;The assigned-addresses in that instance should be 0x82001000 to match the reg.
It probably works because the Linux machinery doesn't check the BDF value?
The purpose of assigned-address in this specific context is to tell the driver how to find its control registers. So the 0x44000 above is the base for the PEX register. The "pci at 3,0", assigned-addresses, and reg are encoding this statement: "Create a PCI bridge at B:D.F using the PEX registers at 0x44000" The B:D.F in all three places should be the same.
Does that sound right Thomas?
I recommend adding some macros and constants derived from the OF PCI spec. It will save us all headaches :)
Jason