Skip to content

PCI: imx6: Random fixes

Marek Vasut linux-arm-kernel linux-pci 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 6 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/6] PCI: imx6: Random fixes

Dear J?rgen Beisert,

Quoted 63 lines

Hi,

I'm also trying to get the PCIe to work on an i.MX6. But the attached device cannot be enabled. The external device is an FPGA directly connected to the i.MX6. I'm using the changes from linux-next to get the machine working up to this point. But it seems I still miss something.

What I see is:

[...]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x1000-0x10000] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci_bus 0000:00: scanning bus
pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400
pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] pci 0000:00:00.0: calling pci_fixup_ide_bases+0x0/0x5c
pci 0000:00:00.0: supports D1
pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci_bus 0000:00: fixups for bus
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: scanning [bus 01-01] behind bridge, pass 0 pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1 pci_bus 0000:01: scanning bus
pci 0000:01:00.0: [1172:0004] type 00 class 0x000000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff]
pci 0000:01:00.0: calling pci_fixup_ide_bases+0x0/0x5c
pci_bus 0000:01: fixups for bus
PCI: bus1: Fast back to back transfers disabled
pci_bus 0000:01: bus scan returning with max=01
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 pci_bus 0000:00: bus scan returning with max=01
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 pci 0000:00:00.0: fixup irq: got 155
pci 0000:00:00.0: assigning IRQ 155
pci 0000:01:00.0: fixup irq: got 155
pci 0000:01:00.0: assigning IRQ 155
pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] pci 0000:00:00.0: BAR 0: set to [mem 0x01000000-0x010fffff] (PCI address [0x1000000-0x10fffff]) pci 0000:00:00.0: BAR 8: assigned [mem 0x01100000-0x011fffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0x01200000-0x0120ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff]
pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff]
pci_bus 0000:00: resource 4 [io 0x1000-0x10000]
pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff] pci_bus 0000:01: resource 1 [mem 0x01100000-0x011fffff]
[...]
pcieport 0000:00:00.0: Resource 0: from 1000000 to 10FFFFF <- my message from pcibios_enable_device()/arch/arm/kernel/bios32.c [...] FPGA 0000:01:00.0: Dummy FPGA driver starts probing
FPGA 0000:01:00.0: Resource 0: from 0 to FFFF <- my message from pcibios_enable_device()/arch/arm/kernel/bios32.c PCI: Device 0000:01:00.0 not available because of resource collisions FPGA 000:01:00.0: Cannot enable PCIe device, aborting
FPGA: probe of 0000:01:00.0 failed with error -5

Quoted 2 lines

pcibios_enable_device() fails due to the start address of this device is still 0.

Looks like your device isn't assigned it's memory windows for some reason. There is a discussion going on about DWC PCIe and how the iATU configuration is wrong and how to fix it in the PCI ML. I'd check that.

btw. do you need to switch the bus to Gen1 to get it to probe your device?