Skip to content

RFC uboot: add u-boot.pbl support

Thomas Petazzoni buildroot 1 version New

Get series with b4
b4 am 20131212083834.3a7b05e7@skate

Versions newest first

  1. v1 RFC Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [Buildroot] [RFC 0/2] uboot: add u-boot.pbl support

Hello all,

Quoted 8 lines · Ryan Barnett

This patchset introduces support for generating a u-boot.pbl image format in u-boot. The u-boot.pbl image format is used by the Freescale?s QorIQ series of processors for in a non-NOR flash based boot configuration. It also adds support to u-boot to generate a Reset Configuration Word (RCW) binary file ? RCW.bin. Customization of the RCW can be one of two methods ? using Freescale?s QorIQ Configuration Suite (QCS) or by .cfg format specified by docs/README.pblimage in the U-Boot source.

[...]

FWIW, I've looked at this code and discussed it with Ryan. The first thing is that it adds too much stuff in uboot/uboot.mk and uboot/Config.in, so I've created a patch that moves platform-specific stuff into other .mk and Config.in files within boot/uboot/, on top of which I've changed Ryan's patch. It makes things more reasonable I believe.

See:

http://git.free-electrons.com/users/thomas-petazzoni/buildroot/log/?h=uboot-arch-spec

However, I've asked Ryan to take some significant portions of his cover letter, and use that to extend the Config.in help text to explain how this thing can/should be used, and under what conditions.

I guess Ryan will resubmit the set of 3 patches when he is done with this Config.in help text writing.

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com