ARM: AM43xx: Update support for AM4372 SoC
Get series with b4
b4 am 20131219170048.GF420@bill-the-catVersions newest first · linked by author and title
- v3 Latest posting 2/20 of 14 patches 0 repliesNew
- v3 posting 1/20 of 14 patches 0 repliesSuperseded
Patches in v3 posting 2/2 No applies recorded yet
None of the 14 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [U-Boot] [PATCH V3 00/14] ARM: AM43xx: Update support for AM4372 SoC
Quoted 89 lines · Tom Rini
Quoted 78 lines · Lokesh Vutla
This Patch series updates support for AM4372 EPOS and GP EVM boards. AM4372 is a low cost Cortex-A9 based application processor targeted at existing ARM9/ARM11 base of customers that need more processing capabilities. Currently there are two boards with AM4372 SoC: EPOS and GP EVM. Except for few differences like oscillator clock and SDRAM both EPOS and GP EVM boards are similar.
EPOS EVM:OSC clk : 25MHz DDR : LPDDR2 @ 266MHz (MT42L256M32D2LG-25 WT:A) GP EVM: OSC clk : 24MHz DDR : DDR3 @ 400MHz(MT41K512M8RH)This patch series is applied on top of Mainline U-Boot Tree and two patches mentioned below:
git://git.denx.de/u-boot.gitmaster
http://patchwork.ozlabs.org/patch/288175/Testing:
-> Boot tested on AM4372 EPOS and GP EVMs, Beaglebone Black. -> verified MAKEALL -s am33xx.
-> Ran checkpatch on all patches.Changes Since V2:
-> Updating the base offsets only for AM43xx
-> Populated DPLLs data for all OPPs and SYS CLK inputs and the correct values
to be read from eFuse.
-> Seperated out ioregs changes into a new patch.Changes Since V1:
As per Vaibhav's and Tom's Comments:
-> Updated the mux data not to use DSPULLUDEN.
-> Reused the emif4d file for configuring emif4d5 registers. -> Updated the code with comments.
-> Rebased on top of Current U-Boot mainline.Lokesh Vutla (12):
ARM: AM43xx: Update the base addresses of modules
ARM: AM43xx: Adapt toti_armv7_common.hconfig file
ARM: AM43xx: Add L2 Support
ARM: AM43xx: Add extra ENV settings
ARM: AM43xx: Select clk source for Timer2
ARM: AM43xx: Update Current Booting devices list
ARM: AM43xx: mux: Update mux data
ARM: AM43xx: clocks: Update DPLL details
ARM: AM33xx+: Update ioregs to pass different values
ARM: AM43xx:EPOS_EVM: Add support for LPDDR2
ARM: AM43xx:GP_EVM: Add support for DDR3
ARM: AM43xx: Add MaintainerSekhar Nori (2):
ARM: AM43XX: board: add support for reading onboard EEPROM
ARM: AM43XX: AddCONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIGsupportarch/arm/cpu/armv7/am33xx/clock.c | 12 +- arch/arm/cpu/armv7/am33xx/clock_am33xx.c | 15 + arch/arm/cpu/armv7/am33xx/clock_am43xx.c | 12 +- arch/arm/cpu/armv7/am33xx/ddr.c | 146 +++++++- arch/arm/cpu/armv7/am33xx/emif4.c | 25 +- arch/arm/cpu/armv7/omap-common/emif-common.c | 14 - arch/arm/include/asm/arch-am33xx/clock.h | 7 +- arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 3 + arch/arm/include/asm/arch-am33xx/cpu.h | 24 +- arch/arm/include/asm/arch-am33xx/ddr_defs.h | 41 ++- arch/arm/include/asm/arch-am33xx/gpio.h | 12 + arch/arm/include/asm/arch-am33xx/hardware.h | 7 - arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 2 + arch/arm/include/asm/arch-am33xx/hardware_am43xx.h | 16 + arch/arm/include/asm/arch-am33xx/mux_am43xx.h | 45 +++ arch/arm/include/asm/arch-am33xx/omap.h | 4 +- arch/arm/include/asm/arch-am33xx/spl.h | 13 +- arch/arm/include/asm/emif.h | 26 ++ board/isee/igep0033/board.c | 10 +- board/phytec/pcm051/board.c | 12 +- board/siemens/dxr2/board.c | 10 +- board/siemens/pxm2/board.c | 10 +- board/siemens/rut/board.c | 10 +- board/ti/am335x/board.c | 40 ++-Quoted 8 lines
board/ti/am43xx/board.c | 355 +++++++++++++++++++- board/ti/am43xx/board.h | 36 ++ board/ti/am43xx/mux.c | 35 +- board/ti/ti814x/evm.c | 4 +- board/ti/ti816x/evm.c | 12 +- boards.cfg | 2 +- include/configs/am43xx_evm.h | 204 +++++------ 31 files changed, 983 insertions(+), 181 deletions(-)
Quoted 1 line
Applied to u-boot-ti/master, thanks!
Note that I've had to update this patch series to fix cm_t335 support and cover pcm051_rev3. Also the dxr2 conversion wasn't quite right (it should have been populating based on settings.ddr3.ioctrl_val) so I fixed that up.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131219/ed77ebef/attachment.pgp>