usb: gadget: fotg210: workaround & new hardware support
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest posting 2/20 of 2 patches 0 repliesNew
- v2 posting 1/22 patches 0 repliesSuperseded
Patches in v2 posting 2/2 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [U-Boot] [PATCH v2 0/2] usb: gadget: fotg210: workaround & new hardware support
Quoted 33 lines · Kuo-Jung Su
2013/12/20 Marek Vasut <[email protected]>:
Quoted 24 lines · Kuo-Jung Su
Quoted 23 lines
From: Kuo-Jung Su <[email protected]>
1. It's known that EP0 fifo empty indication is not reliable, an extra delay is necessary to avoid data corruption while handling packets with size greater than 64 bytes.
2. Since hardware revision 1.11.0, some fields of interrupt status registers are now write-1-clear.
Changes for v2:
- usb: gadget: fotg210: add w1c interrupt status support:
By writting 1 then 0 to get rid of the use ofCONFIG_USB_GADGET_FOTG210_ISRW1C.
Thanks for Marek's comments.- usb: gadget: fotg210: EP0 fifo empty indication is non-reliable
udelay_masked()->udelay(), and patch comment updates.Kuo-Jung Su (2):
usb: gadget: fotg210: add w1c interrupt status support
usb: gadget: fotg210: EP0 fifo empty indication is non-reliableQuoted 7 lines
Quoted 2 lines
drivers/usb/gadget/fotg210.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)Applied both , thanks!
btw. is this FOTG210 stuff used by any platform or is this just a dead code ?
Quoted 8 lines
It's still an active IP, and the only USB 2.0 (host, device, otg) controller we have currently in Faraday.
It's used in upcoming Faraday A369 SoC patch set (I'm still waiting for the dependant NAND driver: ftnandc021 to be commited),
and the new SoC platforms (For politics reason, they won't be released by myself.) in year 2013.
OK, glad to see this won't be dead code soon. Next time, I suppose it'd be better to commit platform first, drivers afterwards, so we dont have dead code for an extended period of time.
Best regards,
Marek Vasut