Skip to content

Add support for keystone2 SoC and K2HK EVM

Tom Rini u-boot 7 versions – New

Get series with b4
b4 am 20140418132414.GX5698@bill-the-cat

Versions newest first · linked by author and title

  1. v6 Latest1 of 9 patches 0 repliesNew
  2. v41 of 9 patches 0 repliesSuperseded
  3. v31 of 2 patches 0 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v2 posting 3/31 of 12 patches0 repliesSuperseded
v2 posting 2/34 of 12 patches0 repliesSuperseded
v2 posting 1/312 patches0 repliesSuperseded
v14 of 7 patches0 repliesSuperseded

1 of 9 patches is in this archive. The cover letter announces 9.

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
2/9tools: mkimage: add support for gpimage format+0 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v6 yet.

Read the v6 thread

Cover letter [U-Boot] [PATCH v6 0/9] Add support for keystone2 SoC and K2HK EVM
Quoted 58 lines · Murali Karicheri

This patch set add support for Keystone2 SoC and K2HK EVM.

Change history:
v6
- Moved arch_timer.c to arch/arm/cpu/armv7 as per comments
- Added Acked-By Heiko to patch #6
- Fixed some minor white space issues.
v5
- Rebased to v2014.04-rc3
- Replaced reg_rmw() with clrsetbits_le32()
- i2c Makefile update to add davinci_i2c sorted
- simplified spi_cs_is_valid() in davinci_spi driver

v4
- Added multibus support in i2c driver. Tested only on Keystone
- Added comments to fdt patch

v3
- Seperated network driver patches from the original series and and is now a different set as there are outstanding issues to be discussed and sorted out. Also the original series is ready for merge to upstream IMO.
- Review comments incorporated. Following are the major comments addressed
- Added KBUILD target for u-boot-spi.gph
- Added bootup and flashing instructions in README
- Cleaned up manually replacing #define <tab> with #define <space>
- Cleaned up k2hk_evm.h include file to remove unnecessary options
v2
- Review comments incorporated. Following are major comments addressed
- split network driver to navigator driver + ethernet driver
- replaced register base + offset implemenation with struct based register access implementation
- Added Readme for NAND no subpage write option
- re-use code for davinci i2c driver on keystone2 with updates
- clock-k2hk.c merged to clock.c
- currently keeping board specific getclk() command. See the thread for the rational.
- Added update to davinci spi driver to re-use on keystone

v1
- added separate patch for sorting tools/Makefile entries
- reworked gpimage patch to allow more re-use across omapimage/gpimage
- dropped patch related to ubifs file size
- added keystone SoC and K2HK EVM support

v0
- preparatory patch for keystone

Murali Karicheri (5):
tools: mkimage: add support for gpimage format
NAND: DaVinci: allow forced disable of subpage writes i2c, davinci: move i2c_defs.h to the drivers/i2c directory
spi: davinci: add support for multiple bus and chip select
k2hk-evm: add configuration for spi1 and spi2 support

Quoted 5 lines

Vitaly Andrianov (4):
fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()
arm: add support for arch timer
i2c, davinci: convert driver to new mutlibus/mutliadapter framework
k2hk: add support for k2hk SOC and EVM

Applied to u-boot-ti/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140418/09467c9e/attachment.pgp>