Skip to content

enable i2c on koelsch-dt (and cleanup lager)

Simon Horman linux-arm-kernel linux-devicetree linux-sh 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 5 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/5] Set Ether device's DMA masks on SH-Mobile boards
Quoted 11 lines · Sergei Shtylyov

Hello.

Here's the set of 5 patches against Simon Horman's 'renesas.git' repo,
'renesas-devel-v3.14-rc2-20130213' tag. Here we add still missing DMA masks for the Ether platform devices (I was always wondering how the 'sh_eth' driver manages to work without them :-). This should be especially important for the Lager/Koelsch boards with their CPUs supporting LPAE and the boards having memory outside 4 GiB address range, so we'd have to eventually enable CONFIG_HIGHMEM for them; I also have plans to add support for NETIF_F_SG to the 'sh_eth' driver -- in which case the correct DMA masks would become important.

Quoted 5 lines

[1/5] ARM: shmobile: Armadillo 800 EVA: set proper DMA masks for Ether device [2/5] ARM: shmobile: BOCK-W: set proper DMA masks for Ether device [3/5] ARM: shmobile: Lager: set proper DMA masks for Ether device [4/5] ARM: shmobile: Koelsch: set proper DMA masks for Ether device [5/5] ARM: shmobile: Genmai: set proper DMA masks for Ether device

Thanks, I have queued these up.