Skip to content

ARM: mvebu: add a clock for mdio nodes on Armada 370/38x/XP

Jason Cooper linux-arm-kernel 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] ARM: mvebu: add a clock for mdio nodes on Armada 370/38x/XP
Quoted 16 lines · Thomas Petazzoni

Jason, Andrew, Gregory, Sebastian,

Here is a set of two patches that add a clock specification to the mdio node on Armada 370/XP and Armada 38x. This allows the mvmdio driver to work properly when loaded as a module, before mvneta is loaded.

I've separated the Armada 370/XP and Armada 38x fixes in two patches, because the Armada 370/XP fix should be pushed to stable, while the Armada 38x does not need to be pushed to stable since Armada 38x support only appears in 3.15.

Thanks,

Thomas

Quoted 8 lines

Thomas Petazzoni (2):
ARM: mvebu: ensure the mdio node has a clock reference on Armada

    370/XP

ARM: mvebu: ensure the mdio node has a clock reference on Armada 38x

 arch/arm/boot/dts/armada-370-xp.dtsi | 1 +
 arch/arm/boot/dts/armada-38x.dtsi    | 1 +
 2 files changed, 2 insertions(+)

Applied both to mvebu/dt-fixes-non-critical for v3.15. Updated for-next as well. If all goes well, I'll send a pull request later in the week.

thx,

Jason.

Read the cover letter in its thread