ARM: shmobile: marzen: Initialise SCIF devices using DT
Get series with b4
b4 am [email protected]Versions newest first
- v2 Latest0 of 4 patches 0 repliesNew
Patches in v2 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [PATCH v2 0/4] ARM: shmobile: marzen: Initialise SCIF devices using DT
Quoted 18 lines · Simon Horman
The aim of this series is to provide a working prototype for enabling SCIF devices using DT on the marzen board when booting using multiplatform.
This series addresses the review received for v1. Changes are noted in the changelog of each updated patch.
This series depends on:
[PATCH v6 00/17] ARM: shmobile: r8a7779, marzen: CCF and multiplatformThis series was created and tested with the above mentioned series applied on top of a merge of:
* The renesas-devel-v3.15-rc1-20140515 tag of my renesas tree.
* The clk-next branch of Mike Turquettes's tree
This is to provide the following which were previously part of this series:
- clk: shmobile: r8a7779: Add MSTP clock support
- clk: shmobile: r8a7779: Add clocks support
Quoted 3 lines
This series works in conjunction with but does not have a run-time or compile time dependency on:
[PATCH v3] serial: sh-sci: Add device tree support for r8a7779
As all the pre-requisites are now in place I have queued up this series.
Quoted 17 lines
Simon Horman (4):
ARM: shmobile: r8a7779: Add scif nodes to dtsi
ARM: shmobile: marzen: Removeearly_printkfrom command line
ARM: shmobile: marzen: Initialise SCIF devices using DT
ARM: shmobile: marzen: Do not use workaround for scif devicesarch/arm/boot/dts/r8a7779-marzen.dts | 24 ++++++++-- arch/arm/boot/dts/r8a7779.dtsi | 60 +++++++++++++++++++++++++ arch/arm/mach-shmobile/board-marzen-reference.c | 6 --- arch/arm/mach-shmobile/setup-r8a7779.c | 8 ++-- 4 files changed, 84 insertions(+), 14 deletions(-)Signature · 1 line
1.8.5.2