Skip to content

RFC arm: socfpga: Usability fixes

Marek Vasut u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest0 of 35 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 35 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes
Quoted 46 lines · Dinh Nguyen
Quoted 18 lines · Pavel Machek

Hi!

Quoted 11 lines · Marek Vasut

This entire RFC series is the first stab at making SoCFPGA usable with mainline U-Boot again. There are still some bits missing, but in general, this allows me to use mainline U-Boot on my SoCFPGA systems. The big missing part is the SPL generation, which still needs a lot of additional work.

This set contains patches for a few subsystems, bu the most part is the SoCFPGA chip support.

Most of the patches should be in good shape already, so I wonder if the RFC tag is really necessary.

Just... I earlier today I tested Marek's git tree based on this series, and it works well for me on board similar to sockit.

Quoted 7 lines

So

Thanks and best regards,

Pavel

I applied all the patches to v2014.10-rc2, and I see that the watchdog has been enabled and it's getting reset:

U-Boot 2014.10-rc2-00139-g70e9e3e (Sep 16 2014 - 11:21:38)

CPU:   Altera SoCFPGA Platform
BOARD: Altera SoCFPGA Cyclone5 Board

Watchdog enabled
DRAM:
U-Boot SPL 2013.01.01-00019-g9cce15f (Jul 18 2013 - 13:05:43) SDRAM : Initializing MMR registers
SDRAM : Calibrating PHY
SEQ.C: Preparing to start memory calibration
SEQ.C: CALIBRATION PASSED
ALTERA DWMMC: 0
reading u-boot.img
reading u-boot.img

Quoted 6 lines

U-Boot 2014.10-rc2-00139-g70e9e3e (Sep 16 2014 - 11:21:38)

CPU:   Altera SoCFPGA Platform
BOARD: Altera SoCFPGA Cyclone5 Board

Watchdog enabled
DRAM:

This doesn't seem like a WDT problem. How much DRAM is there on that kit ? In any case, try this:

1) Edit arch/arm/cpu/armv7/socfpga/misc.c
2) Locate call to get_ram_size()
3) Replace this function call with the size of your DRAM in bytes. (that is, make it "gd->ram_size = 128 * 1024 * 1024;" if you have 128MiB)

I suspect get_ram_size() on socfpga is still broken in mainline and causes this crash you observe.

btw you don't happen to have a spare CV and AV kits you could send me, so I can do the testing rounds on them too, do you ?

Best regards,
Marek Vasut