RFC arm: socfpga: Usability fixes
Get series with b4
b4 am [email protected]Versions newest first
- v1 RFC Latest0 of 35 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 35 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 00/35][RFC] arm: socfpga: Usability fixes
On Wednesday, September 17, 2014 at 01:29:15 PM, Chin Liang See wrote:
[...]
Quoted 4 lines
A quick test from my side and result as below:
1. SDRAM access is working where I can read and write to few spots. :)
Quoted 11 lines
SOCFPGA_CYCLONE5# md 0
00000000: 00000000 aaaaaaaa aaaaaaaa aaaaaaaa ................SOCFPGA_CYCLONE5# mw 0 12345678 100SOCFPGA_CYCLONE5# md 0
00000000: 12345678 12345678 12345678 12345678 xV4.xV4.xV4.xV4.SOCFPGA_CYCLONE5# md 100000
00100000: eafffffdfbff4b3ffffffffefdff33be....?K.......3..SOCFPGA_CYCLONE5# mw 100000 23456789 100SOCFPGA_CYCLONE5# md 100000
00100000: 23456789 23456789 23456789 23456789 .gE#.gE#.gE#.gE#SOCFPGA_CYCLONE5#
What does that mean?
Quoted 24 lines
2. Ethernet seems not working for me.
But I will look into this to find out any missing pieces.
SOCFPGA_CYCLONE5# setenv ethaddr 02:11:22:33:44:55SOCFPGA_CYCLONE5# dhcp
Speed: 1000, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
BOOTP broadcast 6
BOOTP broadcast 7
BOOTP broadcast 8
BOOTP broadcast 9
BOOTP broadcast 10
BOOTP broadcast 11
BOOTP broadcast 12
BOOTP broadcast 13
BOOTP broadcast 14
BOOTP broadcast 15
BOOTP broadcast 16
BOOTP broadcast 17
Quoted 1 line
Retry time exceeded; starting again
This is on the SoCDK, right ?
Quoted 3 lines
3. MMC is not enabled in SocFPGA.
I recall there is a patch from Pavel.
I believe its pending for v2 due to some comments.
This should be in the tree in fact. Is CONFIG_CMD_MMC defined ?