Skip to content

add i.MX6 thermal sensor driver

Albert ARIBAUD u-boot 1 version New

Get series with b4
b4 am 20141115133422.1cd2434d@lilith

Versions newest first

  1. v6 Latest0 of 5 patches 0 repliesNew

Patches in v6 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v6 yet.

Read the v6 thread

Cover letter [U-Boot] [PATCH v6 0/5] add i.MX6 thermal sensor driver

Hello nitin.garg at freescale.com,

Quoted 26 lines · nitin.garg at freescale.com

From: Nitin Garg <[email protected]>

This patch set adds i.MX6 thermal sensor driver
and enables it for mx6sabre boards. Also adds
various anadig bit definitions as required for
upcoming drivers.

Changes in v6:
-Aligned imx thermal driver macro defines with kernel

Changes in v5:
-Don't modify the copyright of cpu.c and crm_regs.h file

Changes in v4:

(quoted diff) +0 -7
-Added imx6 thermal sensor as a driver
-Renamed the config define to be more meaningful
-Move the clock code to clock.c
-Reusing ocotp driver for reading fuse
-Fix check for calibration fuse not programmed
-Aligned the slope computation with kernel
-Added Anadig register defines as seperate commit

Changes in v3:

(quoted diff) +0 -2
-adds the mx6 thermal driver support
-adds the mx6 thermal support to mx6sabresd board.
Quoted 8 lines

Changes in v2:
-run checkpatch and fix reported issues

Nitin Garg (4):
mx6: clock: Add api to enable pll3
mx6: thermal: Add i.MX6 CPU thermal sensor support
mx6: thermal: Check cpu temperature via thermal sensor
mx6: thermal: Enable thermal sensor for mx6 sabre boards.

So, is it 5 as the cover letter says, or 4 as the patches say? If actually 4 and only the cover letter is wrong, then there's no need to repost. If actually 5, then please repost them all, renumbered accordingly.

Amicalement,

Signature · 1 line
Albert.

Read the cover letter in its thread