irqchip: kill the GIC routable domain

After my series removing the gic_arch_extn hack, I figured that the next step was to expunge the GIC driver of the routable domain horror.

There is a few reasons for this:

- The allocation of interrupts in this domain is fairly similar to what we do for MSI (see the GICv2m driver), and stacked domains have proved to be a fitting solution.

- The current description in DT is currently entierely inaccurate, and as we already broke it for the OMAP WUGEN block, we might as well do it again for the TI crossbar.

- The way crossbar, WUGEN and GIC interract is quite complex (this is effectively a stack of three interrupt controllers with interesting exceptions and braindead routing), and stacked domains are the right abstraction for that.

- Other platforms (Freescale Vybrid) are starting to come up with the same type of things, and it'd be good to avoid them following the same broken model.

- It removes a few lines from the code base so it can't completely be a bad idea!

So this patch series does exactly that: make the crossbar a stacked interrupt controller that only takes care of setting up the routing, fix the DTs to represent the actual HW, and remove a bit of the craziness from the GIC code.

As for the previous series:

- I haven't been able to test this at all, I don't have access to the HW. TI people, please test and post fixes, as I expect I introduced a few bugs.

- This actively *breaks* existing setups. If you boot a new kernel with an old DT, interrupt routing *will* be broken. Old kernels on a new DT won't boot either! You've been warned. This really outline the necessity of actually describing the HW in device trees...

As for the patches, they are on top of 3.18-rc7 + tip/irq/irqdomain-arm + the gic_arch_extn removal series.

I've pushed the code to:
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git irq/die-gic-arch-extn-die-die-die

Comments welcome,

	 M.

Marc Zyngier (5):
genirq: Add irqchip_set_wake_parent
irqchip: crossbar: convert dra7 crossbar to stacked domains
DT: update ti,irq-crossbar binding
irqchip: GIC: get rid of routable domain
DT: arm,gic: kill arm,routable-irqs

 Documentation/devicetree/bindings/arm/gic.txt      |   6 -
 .../devicetree/bindings/arm/omap/crossbar.txt      |  18 +-
 arch/arm/boot/dts/dra7.dtsi                        |  10 +-
 arch/arm/boot/dts/dra72x.dtsi                      |   3 +-
 arch/arm/boot/dts/dra74x.dtsi                      |   5 +-
 arch/arm/mach-omap2/omap4-common.c                 |   4 -
 drivers/irqchip/irq-crossbar.c                     | 202 ++++++++++++---------
 drivers/irqchip/irq-gic.c                          |  59 +-----
 include/linux/irq.h                                |   1 +
 include/linux/irqchip/arm-gic.h                    |   6 -
 include/linux/irqchip/irq-crossbar.h               |  11 --
 kernel/irq/chip.c                                  |  16 ++
 12 files changed, 153 insertions(+), 188 deletions(-)
 delete mode 100644 include/linux/irqchip/irq-crossbar.h

Signature · 1 line

2.1.3