Skip to content

add support for Seagate BlackArmor NAS220

Evgeni Dobrev linux-arm-kernel linux-devicetree lkml 4 versions – In review

Get series with b4
b4 am 20141228104627.GA11475@anne

Versions newest first · linked by author and title

  1. v4 Latest1 patch 1 replyIn review
  2. v31 patch 7 repliesSuperseded
  3. v21 patch 1 replySuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v11 patch1 replySuperseded

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1add support for Seagate BlackArmor NAS220arch/arm/boot/dts/Makefile arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts+173 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH v4 0/1] add support for Seagate BlackArmor NAS220

v4: rename basename to blackarmor-nas220
use "Seagate Blackarmor NAS220" as model name use node references instead of repeating the bus structure separate nodes with blank lines
adt7476's node name reflects device function (i.e. thermal) reduce button labels to "Reset" and "Power"
use GPIO_ACTIVE_LOW for regulator's gpio property

v3: documented UART pinout in dts

v2: indent with tabs only
removed NAND layout

Evgeni Dobrev (1):
add support for Seagate BlackArmor NAS220

 arch/arm/boot/dts/Makefile                       |    1 +
 arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts |  172 ++++++++++++++++++++++
 2 files changed, 173 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts
Signature · 1 line
1.7.10.4

Read the cover letter in its thread