sun8i: Remaining sun8i SPL support patches
Get series with b4
b4 am 20141222163905.71b67858@i7Versions newest first
- v2 Latest0 of 4 patches 0 repliesNew
Patches in v2 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [U-Boot] [PATCH v2 0/4] sun8i: Remaining sun8i SPL support patches
Quoted 13 lines · On Mon, 22 Dec 2014 17:35:02 +0800 Chen-Yu Tsai <[email protected]> wrote:
Hi Hans,
Quoted 5 lines · Hans de Goede
Hi Ian, et al,
Here is a v2 of the A23 patches which did not pass review in v1 (so not a resend of the whole set).
I just built a new u-boot for my Q8H tablet this morning against
289dcd4 sunxi: video: Set input sync enable
Quoted 8 lines
and it works nicely. One thing that's not correct, but isn't an immediate issue is that PLL1 is different between sun6i and sun8i. See:
This results in the CPU clock speed being only 504 MHz instead of the configured 1008 MHz full speed. As I said, it's not an immediate issue. In the future with cpufreq, it shouldn't matter either.
Thanks, that's a good catch. Do you happen to know if PLL5 is the same or different between sun6i and sun8i?
The circumstances around the "sun6i: Add k and m parameters to clock_set_pll5()" patch seem to be a little bit fishy to me:
http://lists.denx.de/pipermail/u-boot/2014-December/199279.html
Signature · 2 lines
Best regards, Siarhei Siamashka