Jetson-TK1 support for PSCI

Quoted 37 lines · Thierry Reding

Quoted 6 lines · Ian Campbell

Hi Thierry,

I needed to boot my Jetson in NS mode (in order to boot Xen) and was investigating the possibility of PSCI support when I discovered that you had already started on it[0]. Hurrah!

Quoted 8 lines

I cherry-picked the relevant commit onto u-boot-tegra#master and added a few more patches and now it boots correctly for me, both running Xen (some Xen side patches are needed too) and native Linux.

The main things which was needed was to rebase for some recent Kconfig changes relating to virt and nonsec mode and to arrange for the RAM used by the secure code to be reserved in the FDT. I also reserved the RAM using the hardware MC_SECURITY_CFG registers for good measure.

Great, those were all things that I had wanted to do but never got around to.

Quoted 7 lines

I also pushed my tree to gitorious:
https://gitorious.org/ijc/u-boot jetson-psci-v1

I would Ack your patch, but I don't think you've posted it and it has no S-o-b so that would seem a bit premature/rude of me. For the same reason I've not actually included it in the series posted (but it is in the gitorious branch).

Feel free to take ownership of that patch. I currently don't have the time to work on this and it seems you've made good progress on it.

It could probably use some cleanup because there's a bit of debug output still in there. Also...

Quoted 3 lines

FWIW I think you could drop your stub versions of psci_cpu_off and psci_cpu_suspend (assuming you don't want to implement them) since the common code has stubs.

Quoted 7 lines

... I'd think you'd need to implement these so that you can get proper suspend/resume support in the kernel. I've had to disable cpuidle (via #undef CONFIG_PM_SLEEP in arch/arm/mach-tegra/cpuidle-tegra114.c) in the kernel to make that code not powergate CPUs. Ideally I think the kernel would check that it's running with PSCI support and disable the cpuidle driver. Maybe that could be done by introducing a new cpuidle driver that checks for PSCI availability and uses it when present.

We have a generic CPUidle driver on arm64 which can use PSCI as a backend; we should try to reuse that. The binding should certainly be identical.

It looks like the tegra124 dts in mainline doesn't use enable-method in the DT, so a better option might be to fail early in cpuidle-tegra114.c if _any_ enable-method is present.