arm: reduce .bss section clear time
Get series with b4
b4 am 20150202094615.4779647c@amdc2363Versions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/3] arm: reduce .bss section clear time
Dear All,
Quoted 8 lines
And the next is interesting.
odroid_defconfighas more than 80MB for malloc (we need about 64mb
for the DFU now, to be able write 32MB file).This is the
CONFIG_SYS_MALLOC_LEN. And the memory area for malloc is set to 0 in functionmem_malloc_init(). So for this config that function sets more than 80MB to zero.
Quoted 5 lines
This is not good, because we shouldn't expect zeroed memory returned by malloc pointer. This is a job for calloc.
Especially if some command expects zeroed memory after malloc, probably after few next calls - it can crash...
I think that the above excerpt is _really_ important and should be discussed.
I've "cut" it from the original post, so it won't get lost between the lines.
It seems really strange, that malloc() area is cleared after relocation. Which means that all "first" malloc'ed buffers get implicitly zeroed.
Przemek is right here that this zeroing shouldn't be performed.
I'm also concerned about potential bugs, which show up (or even worse - won't show up soon) after this change.
Hence, I would like to ask directly the community about the possible solutions.
Please look at: ./common/dlmalloc.c mem_alloc_init() function [1].
On the one hand removing memset() at [1] speeds up booting time and makes malloc() doing what is is supposed to do.
On the other hand there might be in space some boards, which rely on this memset and without it some wired things may start to happening.
Signature · 5 lines
Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group