Skip to content

pinctrl: dt-bindings: Fix amx3 SLEWCTRL_FAST binding

Tony Lindgren linux-arm-kernel linux-devicetree linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] pinctrl: dt-bindings: Fix amx3 SLEWCTRL_FAST binding
Quoted 11 lines · Dave Gerlach

Currently both am33xx and am43xx have the macro for SLEWCTRL_FAST in pinctrl dt-bindings reversed so that selecting the macro actually sets SLEWCTRL_SLOW in the pad control registers. These patches correct the bindings but leave the pinctrl states that use the binding *UNMODIFIED*. Previously i2c and mdio on am33xx and i2c, mdio, and uart on am43xx had been using this macro and selecting SLEWCTRL_FAST while actually programming SLEWCTRL_SLOW in the pad config registers.

Because the intended selection was SLEWCTRL_FAST the macros are unchanged. I tested on am335x-gp-evm and am437x-gp-evm with no difference in functionality seen.

Applying both into omap-for-v4.0/fixes thanks.

Tony

Read the cover letter in its thread