Skip to content

mtd: mxc_nand: fix 8 bit ECC and large oob

Sascha Hauer linux-arm-kernel linux-mtd 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest0 of 4 patches 0 repliesNew

Patches in v2 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchSascha Hauer
SeriesR-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/4] mtd: mxc_nand: fix 8 bit ECC and large oob
Quoted 13 lines · Baruch Siach

This patch series fixes mxc_nand bugs that I encountered while trying to use 8 bit ECC mode on i.MX25 with the Micron MT29F8G08ABABA flash chip.

Many thanks to Uwe Kleine-K?nig for guiding me through the process of debugging and fixing, and for contributing a clean-up patch to this series.

This series applies and tested on v4.1-rc1.

This is version 2 of the patch series, addressing the comments and suggestion of Uwe Kleine-K?nig on the first series
(http://thread.gmane.org/gmane.linux.ports.arm.kernel/408635). See each patch for detailed per-patch changelog.

Quoted 7 lines

Baruch Siach (3):
mtd: mxc_nand: limit the size of used oob
mtd: mxc_nand: fix truncate of unaligned oob copying
mtd: mxc_nand: generate nand_ecclayout for 8 bit ECC

Uwe Kleine-K?nig (1):
mtd: nand: mxc_nand: cleanup copy_spare function

I looked at this version and have only found some minor coding style violations (spaces missing on both sides of operators).

Sascha

Signature · 4 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |