PCI: iproc: add bcma PCIe 2.0 controller
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest1 of 2 patches 0 repliesNew
1 of 2 patches is in this archive. The cover letter announces 2.
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 2/2 | PCI: iproc: add bcma pcie driver | +0 | 1 reply |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/2] PCI: iproc: add bcma PCIe 2.0 controller
Quoted 19 lines · Hauke Mehrtens
After Ray submitted the PCIe controller for the iProc devices using pure device tree this adds support for the devices using bcma to scan the bus. This should replaces the driver I initially send for inclusion.
@Ray The driver found in the Broadcom SDK does some more stuff:
* setting up some DMA memory areas
* chaining MPS and MRRS to 512
* PHY changes:
* "improving" the PCIe jitter
* some special initializations for the 3rd PCIe portFor me it works without these additions, but I haven't tested for performance or stability or 3rd port. Can you check if this is needed at all for the devices found on the market?
Hauke Mehrtens (2):
PCI: iproc: makeof_irq_parse_and_map_pci()configurable
PCI: iproc: add bcma pcie driver
Quoted 8 lines
drivers/pci/host/Kconfig | 11 ++++ drivers/pci/host/Makefile | 1 + drivers/pci/host/pcie-iproc-bcma.c | 112 +++++++++++++++++++++++++++++++++ drivers/pci/host/pcie-iproc-platform.c | 2 + drivers/pci/host/pcie-iproc.c | 2 +- drivers/pci/host/pcie-iproc.h | 1 + 6 files changed, 128 insertions(+), 1 deletion(-) create mode 100644 drivers/pci/host/pcie-iproc-bcma.c
Applied to pci/host-iproc for v4.2 with acks from Ray and Rafa?, thanks!
I corrected some typos, the most important being MODULE_LICENSE, where I changed "GPLv2" to "GPL v2". See license_is_gpl_compatible() and eed6542dd53f ("PCI: generic: Fix GPL v2 license string typo").
Bjorn