ARM: dts: sun8i-a33: Support for Sinlinx SinA33 dev board
Get series with b4
b4 am 20150602211834.GD23777@lukatherVersions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/3] ARM: dts: sun8i-a33: Support for Sinlinx SinA33 dev board
Quoted 16 lines · Chen-Yu Tsai
Hi Maxime,
This series enables support for the Sinlinx SinA33 dev board. This is a core/daughter board SDK kit from Chinese vendor Sinlinx. The core board itself does not have any special connectivity, so I didn't split them into 2 files.
The series is based on Vishnu/Hans' A33 series (v2). As the last (dts) patch was not merged yet, there might be a conflict in dts/Makefile.
Patch 1 adds a pinmux setting for uart0 on PB pins. This is new on A33, and is much better than using
R_UARTfor console on A23, as we can also see messages from BROM/boot0 when developing, and also use the same earlyprintk settings as other sunxi platforms.
Quoted 6 lines
Patch 2 adds a pinmux setting for 8 bit eMMC on mmc2. mmc2 also has a reset pin, though I'm not sure if our mmc driver actually uses it. Not using it seems to work anyway.
Patch 3 adds the dts file for the SinA33 dev board. Just the basic set of features are enabled: UART console, MMC, LRADC.
Applied all three, thanks!
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150602/5aa5a4fc/attachment.sig>