PL08x DT bindings and LPC18xx DMA support
Get series with b4
b4 am 20150818164251.GW13546@localhostVersions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/4] PL08x DT bindings and LPC18xx DMA support
Quoted 7 lines · Joachim Eastwood
Hi Vinod,
This is the non-RFC version of the patch set with only a few changes. Hope this can go in for 4.3. Changes to the DT for LPC18xx/43xx will go thru arm-soc once this get accepted.
Quoted 7 lines
This patch set aims to add support for DMA on the NXP LPC18xx/43xx (Cortex-M3/M4) platform. The platform has a PL080 controller with a mux in front of the DMA request lines. This setup is quite common and can be found on most other, if not all, NXP LPC devices.
Patch set adds DT support for the PL08x dmaengine driver and a DMA router driver for the LPC18xx/43xx DMA multiplexer.
Applied, thanks
Signature · 1 line
~Vinod