Skip to content

usb: change clock information for chipidea

Shawn Guo linux-arm-kernel linux-devicetree stable 2 versions New

Get series with b4
b4 am 20150930064857.GF16362@tiger

Versions newest first · linked by author and title

  1. v3 Latest posting 2/20 of 5 patches 0 repliesNew
  2. v3 posting 1/20 of 5 patches 0 repliesSuperseded

Patches in v3 posting 2/2 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchShawn Guo
SeriesA-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [RESEND PATCH v3 0/5] usb: change clock information for chipidea
Quoted 25 lines · Peter Chen
Quoted 10 lines · Shawn Guo
Quoted 9 lines · Peter Chen

This patch set changes usb clock information for legacy i.mx platforms. At these platforms, they needs three clocks to let controller work.

Hi Shawn,

Fabio has tested for both imx27 and imx25 platforms.
I have queued 1/5 and 5/5, would you please help to queue others, thanks.

Quoted 6 lines
Quoted 4 lines

Changes for v3:
- Delete property "needs-three-clocks", and using of_device_id->data to differentiate platforms
- change <[email protected]> #v3.19+ to <[email protected]> #v4.1+

So the last patch will be sent as a fix with stable on copy?

Yes

Quoted 4 lines

In that
case, will USB driver just work without corresponding DTS change? Or the driver change has a dependency on the DTS change?

Quoted 4 lines

At v4.1, One of USB driver changes break i.mx27's USB function. The driver's change at patch 5/5 is also tagged for stable tree, so it needs both DTS and driver's change to let i.mx27 USB work from v4.1.

In that case, you need to have dts and driver changes go through the same tree. For dts patches, you can have

As a side note, the kernel change breaks the ABI with DT anyway.

Shawn