Further mvebu PCIe patches

Jason, Thomas,

Here are further PCIe patches which follow on from the previous set of six I sent earlier in September. This set:

* Separates the DT parsing from the use of this parsed data.
* Fixes memory leaks from kasprintf() and refcount leaks of the DT node where we break out from the loop early.
* Uses gpio_set_value_cansleep() so that GPIOs on I2C expanders can be used for the PCIe reset functionality.
* Switch to using devm_kcalloc() instead of devm_kzalloc(), which eliminates the multiplication, moving it into core code.
* Switch to using a gpio descriptor for the reset gpio, which can contain the active level information from DT. (It would be nice if gpiolib automated some of the resource claiming there.)
* Make PERST# vs clock timing to match PCIe specifications. PCIe specs require the clock to be running for 100us prior to releasing reset.
* Add the standard PCIe capability block in root port form to the emulated PCIe configuration block. This allows the PCI layer to identify the "host bridge" as a PCIe device, and allows us to take advantage of the code in drivers/pci/pcie, particularly aspm for link power management.
* As a result of identifying ourselves as a PCIe root port, this eliminates the need to special case accesses to non-slot 0 in the driver; the lack of other "slots" is something which the generic PCI code knows about for PCIe root ports.

 drivers/pci/host/pci-mvebu.c | 404 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 305 insertions(+), 99 deletions(-)