usb: s3c-otg: Rename driver to dwc2-otg

Quoted 147 lines · Lukasz Majewski

Hi Marek,

Quoted 119 lines · Lukasz Majewski

Quoted 118 lines

Hi Marek,

Quoted 116 lines

On Wednesday, December 09, 2015 at 04:02:58 PM, Lukasz Majewski

Quoted 113 lines · wrote:

Hi Marek,

Quoted 110 lines

On Wednesday, December 09, 2015 at 10:37:42 AM, Lukasz Majewski

Quoted 99 lines · wrote:

Hi Marek,

Quoted 83 lines

The driver is for the dwc2 otg block , so rename it accordingly finally.

Marek Vasut (24):
usb: s3c-otg: Rename regs-otg.h to s3c_udc_otg_regs.h
usb: s3c-otg: Rename struct s3c_udc to dwc2_udc
usb: s3c-otg: Rename struct s3c_usbotg_reg to

dwc2_usbotg_reg usb: s3c-otg: Split private bits from s3c_udc.h usb: s3c-otg: Rename struct s3c_usbotg_phy to dwc2_usbotg_phy usb: s3c-otg: Rename struct s3c_dev_*_ep

usb: s3c-otg: Rename struct s3c_ep
usb: s3c-otg: Rename struct s3c_request
usb: s3c-otg: Staticize s3c_udc_ep_set_stall
usb: s3c-otg: Staticize functions in

s3c_udc_otg_xfer_dma.c usb: s3c-otg: Rename s3c_ep0_*() functions usb: s3c-otg: Rename s3c_ep_*() functions

usb: s3c-otg: Rename s3c_udc_*() functions
usb: s3c-otg: Rename remaining local s3c_*() functions
usb: s3c-otg: Zap useless externs
usb: s3c-otg: Change the driver name to dwc2-udc
usb: s3c-otg: Rename local headers to dwc2_*h
usb: s3c-otg: Rename sources to dwc2_*c
usb: s3c-otg: Rename remaining macros
usb: s3c-otg: Tweak the comments
usb: s3c-otg: Rename USB_GADGET_S3C_UDC_OTG* to

USB_GADGET_DWC2_OTG* usb: s3c-otg: Rename struct s3c_plat_otg_data

usb: s3c-otg: Rename s3c_udc_probe() function
usb: s3c-otg: Rename usb/s3c_udc.h to usb/dwc2_udc.h

 board/altera/arria5-socdk/socfpga.c                |   6

+- board/altera/cyclone5-socdk/socfpga.c |
6 +- board/broadcom/bcm28155_ap/bcm28155_ap.c

| 8 +-

board/denx/mcvevk/socfpga.c | 6
+- board/ebv/socrates/socfpga.c |
6 +- board/samsung/goni/goni.c

| 6 +-

board/samsung/odroid/odroid.c | 6
+- board/samsung/trats/trats.c |
8 +- board/samsung/trats2/trats2.c

| 6 +-

board/samsung/universal_c210/universal.c | 6
+- board/terasic/sockit/socfpga.c |
6 +- drivers/usb/gadget/Makefile

| 4 +-

drivers/usb/gadget/bcm_udc_otg_phy.c | 6
+- .../usb/gadget/{s3c_udc_otg.c => dwc2_udc_otg.c} |
205

+++++++++++---------- .../{s3c_udc_otg_phy.c =>
dwc2_udc_otg_phy.c} | 21
++- .../usb/gadget/dwc2_udc_otg_priv.h |
43 ++--- .../usb/gadget/{regs-otg.h => dwc2_udc_otg_regs.h} | 32 ++-- ..._udc_otg_xfer_dma.c => dwc2_udc_otg_xfer_dma.c} | 202 ++++++++++----------
include/configs/bcm28155_ap.h | 2
+- include/configs/exynos4-common.h |
4 +- include/configs/s5p_goni.h

| 4 +-

include/configs/s5pc210_universal.h | 4
+- include/configs/smdkv310.h |
4 +- include/configs/socfpga_common.h

| 2 +-

Quoted 11 lines

include/usb/dwc2_udc.h | 23
+++ 25 files changed, 319 insertions(+), 307 deletions(-) rename drivers/usb/gadget/{s3c_udc_otg.c => dwc2_udc_otg.c} (77%) rename drivers/usb/gadget/{s3c_udc_otg_phy.c => dwc2_udc_otg_phy.c} (83%) rename include/usb/s3c_udc.h => drivers/usb/gadget/dwc2_udc_otg_priv.h (69%) rename drivers/usb/gadget/{regs-otg.h => dwc2_udc_otg_regs.h} (92%) rename drivers/usb/gadget/{s3c_udc_otg_xfer_dma.c => dwc2_udc_otg_xfer_dma.c} (88%) create mode 100644 include/usb/dwc2_udc.h

What is the base sha1 and branch for those patches?

Quoted 2 lines

I cannot apply them on u-boot-usb/master (SHA1:
59a38d86de2439c72d72be54958a04bb1b778410)

I should've updated u-boot-usb, sorry about that. I can pick them through u-boot-usb/master if you don't mind to make things easier for you. I put the patches into u-boot-usb/s3c-udc for now.

Quoted 7 lines

Quoted 7 lines

Quoted 5 lines

Quoted 3 lines

Ok, thanks.

I will examine that.

OK, shall I wait with application then ?

Please prepare u-boot-usb/s3c-udc branch.

I've run this patch series through buildman (before running tests):

./tools/buildman/buildman.py --branch=HEAD samsung --detail --verbose --show_errors --force-build --count=24 --output-dir=./BUILD/

And I've received several errors:
arm: + odroid

+../board/samsung/odroid/odroid.c:460:15: error: 'PHY0_SLEEP'

undeclared here (not in a function)

(quoted diff) +5 -0

+  .usb_flags = PHY0_SLEEP,
+               ^
+make[2]: *** [board/samsung/odroid/odroid.o] Error 1
+make[1]: *** [board/samsung/odroid] Error 2
+make: *** [sub-make] Error 2

Quoted 1 line

Please fix :-)

Try the attached fix, if it's OK with you I will wrap it into 04/24 .