Add support for Engicam IMX6UL module
Get series with b4
b4 am 20160330114748.GF28207@tigerVersions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/4] Add support for Engicam IMX6UL module
Quoted 8 lines · Michael Trimarchi
Thi patch series add the support for Engicam IMXUL product
https://community.freescale.com/docs/DOC-328428
Based on Freescale? i.MX 6UltraLite processor, a high performance, ultra-efficient processor family featuring an advanced implementation of a single ARM? Cortex?-A7 core, which operates at speeds up to 528 MHz.
Quoted 8 lines
The new ENGICAM GEA M6UL module is suitable for cost effective HMI applications requiring high performance CPU.
Michael Trimarchi (4):
ARM: dts: imx6ul: Add flexcan1 and flexcan2 support
ARM: dts: imx6ul: Add LCDIF support
ARM: dts: imx6ul: Add GPMI nand controller support
ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support
There are quite some changes around imx6ul.dtsi getting into 4.6-rc1. Can you please rebase onto 4.6-rc1 and resend?
Shawn
Quoted 15 lines
arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/imx6ul-geam-kit.dts | 102 +++++++++ arch/arm/boot/dts/imx6ul-geam.dtsi | 371 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6ul.dtsi | 68 ++++++ drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 + drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +- 6 files changed, 557 insertions(+), 3 deletions(-) create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsiSignature · 1 line
2.7.0